How to connect wifi on windows 7?
Many people connect a wireless Wi-Fi network at home so that they can use the Internet without wires anywhere in the apartment and from any device. Usually, users of a personal computer connect a wire from the router to the computer unit so that the speed is maximum. However, it happens that the wire to lead to the computer is not reasonable and then people try to set up a Wi-Fi connection.
Consider how you can connect Wi-Fi to a computer on the Windows 7 operating system.
How to connect Wi-Fi on PC
First of all, you need to buy a wireless modem for your computer, because in the usual configuration, computer units are not equipped with a Wi-Fi network card. Such a block can be found in any computer store. You can also purchase an optional USB cable to place the unit in a more favorable position where the wireless connection will be best. When connecting the unit, it will still be necessary to install drivers for the operation of the unit. They usually come with the block.
Then you need to go to "Control Panel" - "View Network Connections". There we activate the wireless network connection, and then we find our wireless network and connect to it. It remains only to enter your username and password and you can use the Internet.
The procedure for connecting Wi-Fi to a PC on Windows 7 is simple. Once having learned how to do this, the user will not spend more time on the entire module activation process than it will take him to read this instruction.
But first you need to find out how to perform the procedure. The following guide will help you learn how to turn on Wi-Fi and, if necessary, troubleshoot related problems while doing so.
Main conditions for Wi-Fi connectivity
Most modern computers are equipped with modules for communicating with Wi-Fi networks.
Depending on the PC model, as well as the version of Windows 7 running on it, the methods for enabling and configuring a wireless network connection may also differ.
However, the principle of operation in all devices is approximately the same.
Basic conditions for the ability to connect to Wi-Fi networks:
- The wireless communication module (adapter) in the PC must be in good working order and activated;
- The latest drivers are installed in the computer for the correct functioning of the Wi-Fi adapter;
- The presence within the radius of the PC of a router broadcasting Wi-Fi to connect to the Internet provider, for example, Rostelecom.
How to find out if Wi-Fi is enabled on a Windows 7 PC?
On a PC, the lack of a network connection displays a cross on the connections icon.
In the Seven, Wi-Fi is activated through the network icon on the taskbar. Already by the way it looks, you can accurately tell about the current Wi-Fi connection mode.
Turning on on a laptop
In order to connect to Wi-Fi on a portable PC, you must activate the module with a switch or a key combination.
Inclusion technique
To enable the Wi-Fi adapter, you must do the following:
Keyboard shortcut
Various key combinations can be used. If they do not have characteristic patterns, then it is recommended to go through the options from "F1" to "F12", of course, not forgetting to hold the "Fn" button. For example, the photo below shows an example of enabling the adapter on an Acer laptop.
Button on the case
The switch or button is most often placed by the manufacturer on one of the ends of the laptop. There is always a wireless network icon next to or on it.
On different laptop models
Factory solutions for how to turn on a Wi-Fi module are not full of great variety, as each manufacturer tries to simplify and standardize the procedure for connecting to networks for their equipment.
For example, Lenovo simultaneously provides several ways to connect to a Wi-Fi distribution. Their laptops sometimes have a physical toggle switch to activate the Wi-Fi adapter,
as well as a dedicated key.
The most commonly used combination is Fn and F5, but sometimes the button responsible for turning on is F3.
HP
The most commonly used is the simultaneous pressing of "Fn" and "F12".
Previously, HP laptops were equipped with a separate key that was located above or below the keyboard.
Often, the latest HP models are equipped with a touch key that you can adjust and activate the Wi-Fi adapter with the touch of a finger.
Asus
On "ASUS" it is required, while holding the "FN" button, click "F2".
On older laptops from this manufacturer, separate switches were provided, located on one of the ends of the mobile PC.
Such a toggle switch must simply be set to the "On" position and the adapter is activated.
Method for connecting to a wireless network
To connect to Wi-Fi, the user will need to follow the following step-by-step instructions:
When, after following the above instructions, it was not possible to connect to the network and set up wi-fi, you will need to analyze the causes and eliminate them. This is the focus of the remaining sections of this manual.
Checking the Wireless Adapter in Device Manager
You need to do the following:
Enabled in Network Neighborhood Settings
If the attempts were unsuccessful, then most likely you need to fix the problem with the software.
Driver update
If the computer is accessed to the World Wide Web via "air" and not via cable, then it is equipped with a wireless module. The device can be built-in or externally connected via a USB port.
In order to ensure stable and normal operation of this Wi-Fi adapter in a PC, special software (drivers) is required.
Ways to install and update drivers
Usually, a CD with drivers is included with a laptop or desktop PC, but if it is not available, then the current versions of the software can be downloaded from the hardware manufacturer's resource.
There are also many convenient software update applications that can greatly facilitate the process of searching and installing not only for beginners, but also for experienced users. Windows 7 native tools, such as Device Manager, also allow you to quickly install software.
Using the official resource
The wireless module is already installed in laptops, so to reinstall the drivers, you need to visit the page of the company that released the PC motherboard.
In order to accurately find out information about the motherboard used in the computer, you need to perform the following steps:
Having found out the information about the board, you need to visit the manufacturer's page, where you can do the following:
In the case when a Wi-Fi module connected via a USB port is used, the manufacturer's name is written on the adapter case or on its packaging, so the procedure for installing drivers for it is slightly simplified. You can immediately visit the manufacturer's website and download and install the appropriate software.
Using Apps
Many handy programs have been developed to automatically update the software on a home computer, which facilitate the process of installing drivers, for example, "Driver Genius".
The sequence of actions consists of the following steps:
Using Device Manager
You need to take the following steps:
This option is error-free and the most reliable when installing software for any computer devices.
Hello! Today we will deal with turning on Wi-Fi on laptops that run on Windows 7. For some reason, many people ask such questions. But as a rule, Wi-Fi on a laptop is enabled by default. That is, if the driver is installed, then you can immediately connect to Wi-Fi networks. You don’t need to make special settings, and somehow you don’t have to turn on Wi-Fi on a laptop in a special way. No, there are, of course, different cases and problems when you cannot connect to Wi-Fi without dancing with a tambourine. Now we will understand everything in detail.
If you encounter a problem turning on Wi-Fi, then your Internet connection status will most likely be like this:
If the network icon is simply crossed out with a red cross, then there are no Wi-Fi networks available for connection in the radius, or the wireless network is disabled. If you have just such a status (icon), then I recommend watching this instruction: Before moving on to some instructions, let's figure out that turning on Wi-Fi on a laptop, and turning on Wi-Fi on Windows 7 (in the operating system itself) are different things. Therefore, I will divide the article into these two points. So it will be much clearer and easier to understand this issue. What is our main goal? That's right, connect to a Wi-Fi network. You will succeed! Follow instructions.
Before you go to some settings and fill your head with unnecessary information, try connecting your laptop to a Wi-Fi network right now. According to this instruction: . Perhaps you already have everything turned on, configured, and you can connect without any problems.
If something does not work out, then see this article to the end, or possible connection problems that I described in the article at the link above.
Turn on Wi-Fi on a laptop: with a keyboard shortcut, or a switch on the case
On almost every laptop: Asus, HP, Acer, Lenovo, Del, etc., there is either a special switch or a keyboard shortcut that turns Wi-Fi off and on. To be honest, I don’t know how it is on other laptops, but on my Asus, pressing the FN + F2 key combination turns off all wireless modules. The pop-up window says: "all wireless device on". Which means that all wireless interfaces are enabled or disabled. At the same time, Wi-Fi does not disappear.
These keys, or switches, should be checked only in extreme cases, when nothing else helps. And manage wireless connections from under Windows. Since the combination of special keys does not always work, or they work, but not as they should.
On the same Asus laptop, to turn off or turn on Wi-Fi, you need to press the key combination FN+F2.
On laptops DEL, is the key combination Fn+F2, or Fn+F12. On the HP- Fn+F12. Lenovo-Fn+F5 (or, look for a special switch on the laptop case). If you have Samsung, then these are the keys Fn + F12, or Fn + F9. And on Acer- Fn+F3.
As I already wrote, a special switch can also be used to turn on Wi-Fi. Look at the body of your laptop.
And on the key, which is used in combination with Fn, an antenna is usually drawn.
It is better not to touch these keys at all. As I wrote above, they do not always work adequately. And yes, they make little sense. Everything is fine, in most cases, pressing the keys simply tells the system to turn off the Wi-Fi adapter.
Turn on Wi-Fi in Windows 7
Let's now figure out how to manage the wireless adapter in the operating system itself. Let's start with the most important. And most importantly, this is an installed, properly working driver for Wi-Fi (Wireless adapter). If there is no driver, then no matter how hard we try, we will not be able to turn on Wi-Fi. But first things first.
First, let's check if we have the adapter enabled. To do this, right-click on the Internet connection icon (in the lower right corner), and select Network and Sharing Center. Left, select item Change adapter settings.
If near the connection "Wireless Network Connection" written "Disabled" then right click on it and select Turn on.
After these steps, the status of the Internet connection should change. And if there are Wi-Fi networks available for connection in the radius, they will be displayed in the list, which can be opened by clicking on the icon itself (tray icon). You can select the desired network and connect to it.
If you do not have a "Wireless Network Connection" connection, then most likely you do not have a driver installed on your Wi-Fi adapter. Install the driver and everything will work.
Update: Trying to enable wireless in Mobility Center
To open the mobility center in Windows 7 you need to press the keyboard shortcut Windows + X.
There should be a "Wireless" tab. Most likely you will have it disabled. Click on the "Enable Wireless" button.
It happens that the wireless button in the mobility center is inactive.
From my own experience, I can say that the reason is most often in the software. And most often it is in the utilities that are responsible for managing wireless modules on a laptop, or the function keys. Therefore, go to the laptop manufacturer's website, in the support section, find the download page for your laptop model, and see if there are such utilities. If yes, download and install them. Also there you can download the driver for Wi-Fi (Wireless) and run its installation.
How to check the operation of the Wi-Fi adapter in the device manager?
You can also go to Device Manager and see if there is a wireless network adapter and how it works. To open the device manager, do this: go to Start, then Control Panel. Choose a section Equipment and sound. On the tab Devices and printers click on Device Manager.
Open a tab in the manager Network adapters. Wi-Fi adapter has something like this: "Atheros AR9485WB-EG Wireless Network Adapter". Can be guided by word Wireless. You should have something like this picture:
If you see an arrow icon next to the driver, then right-click on the adapter itself and select Engage.
If the adapter is not in the device manager at all (usually there is only one network card driver) then you need to install the driver. Again, you can see the article.
That's actually all the Wi-Fi settings in Windows 7.
After you still connect to the wireless network, you may expect another surprise - Error "Without access to the Internet" I wrote about solving this problem in a separate,.
One of the most frequently asked questions today is how to connect a WiFi network on a Windows 7 laptop? The fact is that the technology of high-speed wireless communication is already deeply embedded in everyday life. Almost every home has a WiFi router, to which several devices are connected at once.
This is very convenient. Since to connect a laptop to the network you do not need to pull a bunch of wires, and the users themselves are not tied to one place. WiFi allows you to fully use high-speed Internet and at the same time have the ability to move freely within the coverage area of the router. And despite the fact that many people know this technology, moreover, many use it every day, still few people know how to connect to wi-fi on a laptop with Windows 7. This is what will be discussed in this publication.
But before going directly to the system settings, you should determine how the technology works and what you need in order to create your own group.
How to set up Wi-Fi on a Windows 7 laptop: Video
Create a private network
First of all, to create a network, you need a WiFi router. If you want to create a local network without access to the Internet, then everything is extremely simple. To do this, you need to turn on the router and that's it.
But things get a little more complicated when an internet cable is connected to the router. In this case, the group members get the opportunity to access the global "web". This requires additional configuration of the router.
This is done in the following way. To enter the router settings menu, connect to it and enter 192.168.0.1 in the address bar in any browser. It is worth noting that the address may differ depending on the device model. The required address is indicated on the box from under the router, as well as in the instructions. But in the vast majority of cases it is 192.168.0.1 or 192.168.1.1.
How to easily find out the IP address of a WiFi router: Video
After you get to the settings menu, you should go to "Network" and to the "WAN" item. All basic settings are entered here. In the window that appears, you must enter the data that your provider provides. In the "WAN Connection Type" line, select "Static IP". This means that all data must be entered manually.
It is worth noting that, as a rule, the router receives data automatically. To do this, you can select "Dinamic IP". But in order for the network to work stably, it is better to enter all the data manually. As shown in the picture. At the same time, remember that the data to fill in is individual for each. They are provided by the provider.
After entering these data, you can create a network and combine several computers into a group. In addition, each participant will have access to the Internet. It is recommended to set a WiFi password. This is to prevent attackers from joining the group.
Connecting a WiFi network on a laptop with Windows 7: Video
Connecting a laptop to a WiFi network
So we come to the main question, how to connect to a WiFi wireless network on a laptop. First of all, for this you need to install the drivers on the adapter and turn it on.
The connection itself is extremely simple. The fact is that the Windows 7 operating system is much more convenient. Thanks to this, connecting to the network is carried out in just a few clicks.
After that, the module will turn on and the system will automatically start searching for available WiFi networks. In the lower right corner (so-called tray) you will see the WiFi icon, which displays the signal strength. When you click on it, you will see a list of networks that are available. As a rule, such connections require a password, and if you do not know it, you will not be able to connect.
From the proposed list, select the desired option, as a rule, this is the name of your router, and click the "connect" button. If you set a password in the router settings, then you should enter it and click "Connect". This completes the connection to the WiFi network in Windows 7 on the laptop.
How to find out the password for your WiFi connection in the router settings: Video
Of course, when connecting, various problems may arise. However, if everything is done correctly, then there should be no difficulties. As a rule, the most common connection error is an incorrectly entered password, so you should check the language in which you enter and whether Caps Lock is enabled.
In addition, if there are connection problems, you should enter some settings on the laptop in the Windows 7 system itself. If the computer was previously connected to the Internet using a cable or USB modem, then the system could remember the old settings. Therefore, they need to be changed.
To do this, go to the "Network Control Center" by clicking on the WiFi icon in the tray. In the window that appears, select "Change adapter settings". Here you should find the shortcut "Wireless Network Connection", right-click on it and run the properties.
WiFi is a modern wireless technology that allows you to create private networks by grouping computers, smartphones, tablets and other devices together. This, in turn, allows the exchange of files and data between group members without a wired connection, using radio waves. To date, this technology has tightly entered the lives of people, and everyone knows what it is. However, not everyone knows how to set up WiFi on a laptop with windows 7.
How WiFi Works
Before proceeding to the wireless network settings, you should understand how the technology works. Everything is simple. A laptop or other mobile device has a built-in WiFi module. This is an ordinary radio receiver that works on receiving and transmitting information. Data transmission takes place on a broadband radio frequency, which achieves a high transmission speed.
As you may have guessed, to connect to a wireless network, you need an access point, the functions of which are performed by a Wi-Fi router. We will move on to the network settings a little lower. The router (the so-called router) allows you to collect all computers, laptops, and devices that have a WiFi adapter into one group for information exchange and remote control.
It is worth noting that for the correct operation of the module, drivers must be installed on the computer or laptop. This is a special software that controls the operation of the adapter. Without such software, it is impossible to set up WiFi on a laptop with windows 7, since the module simply will not work.
Connecting and configuring WiFi in windows 7: Video
How to install drivers for WiFi module
As a rule, a laptop comes with a disk with the necessary programs, including drivers. Installing them is extremely easy. You need to insert the disc into the drive. After that, it will automatically start, and you will only need to click "Full installation". This completes the installation, after which you need to reboot the device.
Do not rush to get upset if such a disk is not available for some reason. Everything you need can be easily and quickly downloaded from the Internet. To do this, you just need to go to the official website of the laptop manufacturer and select your model from the list. All this is completely free, and all the proposed software is checked for viruses. It is worth noting that when manually installing drivers, it is recommended that you install them in a specific order.
First of all, the driver is installed on the motherboard (chipset) and only after that on the processor and video card. After that, you can install drivers for all other elements, including the network card and WiFi adapter.
Reinstall WiFi Driver: Video
After all the programs are installed, you should restart your computer and go to the network settings.
Setting up a wireless connection in windows 7
So, here we come to the main question, how to set up WiFi on a laptop with Windows 7. After installing the drivers, you need to enable the WiFi adapter. This can be done using a specially provided button, which is indicated by the corresponding icon. On some laptops, this button is combined with another function, and to turn on the wireless module, press "FN", and, without releasing it, press the adapter's power button.
Read also
After that, the system will automatically start searching for available connections and offer you a list to choose from. If the module did not turn on and the system did not start the search, then go to the "Start" menu and run the "Control Panel". In the window that appears, click "Network and Internet" and go to the "Network and Sharing Center".
Related Articles
In the window that appears, in the column on the left, select "Change adapter settings". Here you will see the label "Wireless Network Connection". If it is gray, then you should right-click on it and click "Enable".
After that, in the windows 7 tray (in the lower right corner - a little to the left of the clock and date), a WiFi connection icon will appear that displays the signal strength. When you click on it, a window will open that displays a list of networks available for connection. Here you need to select the name of your router and click the "Connect" button.
If a password was specified in the router settings, then you must enter it and click "Connect".
It is worth noting that in some cases, additional configuration of the WiFi wireless network on the windows 7 system may be required. To do this, go to the "Network and Sharing Center" and go to the "Change adapter settings" item (you already know how to do this).
Here, right-click on the “Wireless Network Connection” shortcut and select “Properties”. In the window that appears, find "Internet Protocol version 4 (TCP / IPv4)", select it and click "Properties". Next, enter your network information. As a rule, modern routers provide all the data automatically. This means that initially all the checkboxes should be set to "Obtain an IP address automatically" and "Obtain DNS server address automatically".
Sometimes this feature is not supported and therefore all data must be entered manually. How to set up WiFi connection on windows 7 manually? Everything is simple. To do this, move the checkboxes to "Use the following IP address:" and enter the following values:
- IP address - 192.168.0.3;
- Subnet mask - 255.255.255.0;
- The default gateway is 192.168.0.1.
After that, select "Use the following DNS server address" and enter the following values:
Read also
- Preferred DNS server - 192.168.0.1;
- Alternative DNS server - leave it unchanged.
Click the OK button and close all windows.
The values you enter may vary. It all depends on what data the provider provided to you or on how the router is configured. But in the vast majority of cases, the above data is used.
This completes the WiFi network setup on a laptop with windows 7. Of course, it is impossible to describe a universal method for setting up a wireless connection that will suit absolutely everyone, since there are a variety of problems that require an individual approach to solving. However, in most cases, setting up a Wi-Fi network on Windows 7 is limited to the settings described above.
How to set up Wi-Fi on a windows 7 laptop: Video
How to set up wifi on a windows 7 laptop
How to easily connect and set up Wi-Fi in a windows 7 laptop
How to turn on wifi on windows 7 laptop
How to distribute Wi-Fi from a laptop to windows 7
bezprovodoff.com
How to set up wi-fi on a laptop?
Connecting to a wireless network is the most convenient way to access the Internet at good speed without unnecessary wires. However, to enjoy all the benefits of a wireless connection, you must first understand how to set up Wi-Fi on a laptop.
Turning on the adapter
Before you start creating a new connection, you need to check if the Wi-FI adapter is enabled.
The function key for turning on / off the adapter is different for each laptop model. For example, ASUS laptops use Fn + F2, and Acer uses Fn + F3. On some Lenovo models, the adapter status is controlled by a hardware switch located on the front panel.
To determine which key you have, look at the F1-F12 row. One of the buttons should have an icon - an antenna that distributes a signal. Press this button in combination with the Fn key and check that the Wi-Fi adapter indicator light changes from red to blue or green.
What should I do if the Wi-Fi adapter does not turn on?
There are situations when after pressing the function key the adapter does not turn on. This issue usually occurs due to one of the following reasons:
- Incorrectly installed drivers.
- Incorrect system operation.
- Virus infection of the laptop.
Until you eliminate the cause, the question of how to set up wai wai in a laptop will not receive a positive resolution. Most often, the problem lies in incorrectly installed drivers, but it will also be useful to check the system for viruses. If no malicious applications are found, reinstall the Wi-Fi module drivers and try turning it on again.
How to set up wifi on a laptop
Setting up on windows XP
To configure, it is enough to correctly specify some parameters of the wireless connection:
If a password is set for the wireless connection, then you will need to provide a security key, after which the connection will be established.
Setting up on windows 7
We figured it out with XP, now let's see how to set up a wireless network on a laptop with windows 7 installed. There are practically no fundamental differences:
This completes the wifi setup on a laptop with windows 7. When you connect, you enter the security key and get access to the Internet.
For windows 8.1 or windows 10, there are no differences in settings from the seventh version. The list of networks available for connection can be called directly from the notification panel - there is a special Wi-Fi icon in the tray.
Wi-Fi setup video on a laptop
LookForNotebook.ru
Instructions: How to set up Wi-Fi on a laptop
Almost every laptop has the ability to connect to wireless Wi-Fi. With the help of this technology, computers exchange data between themselves and network devices (printers, access points, etc.), and also access the World Wide Web.
There are many laptop models, but they all work according to the same communication standards. Can you imagine what their owners would have to do if the Wi-Fi setup on each laptop was done in its own way?
The procedure for setting up a wireless network depends only on the operating system.
Some manufacturers equip their laptops with network utilities, but this does nothing new, except that it makes the setup process more convenient. Of course, you can use them, but it is more useful to be able to work with OS tools.
If you figure out how to set up WIFI on windows 7, 8 and XP using the system tools, you can do it on any laptop, regardless of model.
Back to menu
Before you connect your laptop to a Wi-Fi network for the first time, you need to do three things:
Back to menu
To turn on the Wi-Fi adapter on a laptop, a button or key combination may be provided: Fn + [one of the F1-F12 keys, which shows the Wi-Fi icon]. The fact that the adapter is turned on can be understood by the glow of the indicator on the laptop case:
Back to menu
To install the wireless driver, connect the laptop to the Internet using cable access or a USB modem, go to the manufacturer's website and download the wireless driver for your operating system.
Run the downloaded file, wait for the installation to finish and reboot your machine.
To automatically start the WLAN AutoConfig service (if it does not work), open a command prompt with administrator rights and run two commands in it:
- sc config Wlansvc start= auto
- net start Wlansvc
After that, the Wi-Fi adapter will “see” the access points that are in the signal reception area.
Back to menu
Quick connection
To connect your laptop to an existing Wi-Fi, click on the "Network" icon in the system tray and select the desired access point from the list.
Click the "Connect" button.
Enter the security key (password) and click OK. The connection will be established.
In addition to this method, you can connect to the selected wireless point by pressing the Wi-Fi button on the modem (router).
Important! Networks marked with an exclamation mark shield icon do not require a password. They are not protected by anything, and data is transmitted through them in clear text.
back to menu
To connect to an invisible network whose name is hidden, as well as to create a new wireless access profile, right-click on the "Network" icon in the tray and enter the "Network Control Center ...".
In the "Change network settings" list in windows 7, click "Set up a new connection or network", and in windows 8 (8.1) - "Create and configure a new connection or network".
Select "Manually Connect to a Wireless Network". This window, like the next ones, looks the same in windows 8 and 7, so let's analyze the setting using windows 8 as an example.
Enter the access point name (SSID), security type, encryption, and password. If you are going to use this network all the time, check the "Start the connection automatically" box.
The "Connect if the network is not broadcasting" option should be checked when the access point is not visible in the list.
In the next window, you can change the connection settings by clicking the button of the same name.
The main parameters - the name (SSID), the type and availability of the grid, cannot be changed. You can change the security settings, but they must be the same as those assigned to the access point.
Back to menu
Connect to available wireless networks. To connect the laptop to existing Wi-Fi networks, right-click on the "Network" icon in the tray and open "View Available Wireless Networks".
Select the desired access point from the list and click Connect.
Enter the password (security key) and confirm it. After clicking on the “Connect” button, the connection will be established.
Back to menu
To reconfigure existing Wi-Fi settings, go to the "Control Panel" and open the "Network Connections" section.
Right-click "Wireless Connection" and open its properties.
In the new window, check "Use windows to configure the network", then in the "Preferred networks" section, click "Add".
Here you can change the type of security (authenticity) of the connection, the type of data encryption, and also check the box "Connect if the network is not broadcasting." The last option must be checked when your access point is not visible in the list.
If you do not know how to set up Wi-Fi on a windows 7 laptop, but want to learn, then this video tutorial will help you get all the answers. This is a topical issue that it is desirable for every user to know, since Wi-Fi is the main one nowadays.
geek-nose.com
How to set up Wi-Fi on a laptop with windows XP, 7, 8
Wireless communication technologies are developing very quickly. To date, most produced netbooks, laptops, tablet computers, smartphones and even TVs are equipped with a built-in wireless Wi-Fi adapter, which makes it possible to quickly and conveniently connect to wireless networks. Not all users use the connection of a TV or e-book to a wireless network, which cannot be said about laptop owners. We want to talk about how to properly configure Wi-Fi on a laptop with an operating system of the windows family on our own, without the help of a specialist from a service center.
Many laptop owners face problems connecting to a Wi-Fi network. For various reasons, the computer refuses to properly connect to the network, as a result of which either there is no connection at all, or the connection is working, but access to the Internet is limited. In such a situation, the issue of setting up Wi-Fi on a laptop is very relevant, and we will take a closer look at the whole process on various operating systems of the windows family.
Connecting a router to a laptop and creating a Wi-Fi network
Before. How to configure Wi-Fi on a laptop, you need to correctly connect a router to the computer and create a network to which we will connect. We have already discussed how to configure the router itself. Please read this article carefully as it describes the basic principles of setting up a router and creating a wireless network with it. Particular attention is paid to the direct creation of a network, the choice of the type of data encryption and setting a strong password.
Unfortunately, few users pay due attention to setting up a router. But the correct implementation of this procedure often determines the performance of the entire wireless network, as well as the possibility of correctly connecting not only laptops, but also other compatible devices to it.
Enabling Wi-Fi adapter on a laptop
Before setting up a wireless connection, you need to enable the Wi-Fi adapter on your laptop. This can be done using a special button or using a combination of function keys (depending on the laptop model and manufacturer). If you are the owner of a laptop from HP, then to turn on Wi-Fi, you need to press the key combination “Fn + F12” or simply “F12”.
Keyboard shortcut for Acer laptops “Fn + F3”. After you press these keys, the connection manager settings window will appear on the screen, in which we set the inclusion of Wi-Fi.
For smart devices from Asus, the key combination is “Fn + F2”.
If you are the owner of a Toshiba laptop, then to turn on the Wi-Fi adapter, you must press the “Fn + F8” keys.
The keyboard shortcut for Samsung devices is “Fn + F12”.
Lenovo laptops have a special switch on the front panel that is responsible for the operation of the Wi-Fi adapter. If you own a Lenovo device, use this switch.
If, after pressing the function keys, no changes occurred, and the Wi-Fi module did not turn on, then this may be caused by one of the problems:
- The operating system is not working correctly
- Drivers are not working correctly
- Laptop is infected with viruses
This problem is solved by reinstalling the drivers. A running wireless module is a prerequisite for setting up Wi-Fi on a laptop. If your device does not have a Wi-Fi module (this is extremely rare), then you can always use an external wireless adapter that connects to your laptop using a USB connector. Next, we will look at the direct configuration of Wi-Fi, depending on the type of operating system used. Earlier, we considered the issue of convenient distribution of Wi-Fi from a laptop. Read it, you will be interested.
Wi-Fi setup in windows XP
First of all, we need to go to the properties of the wireless connection. To do this, we go to the “Network Connections” section and then select our wireless connection and go to its properties.
In the window that appears, set the selectors opposite the items corresponding to the automatic acquisition of network parameters. However, this mode does not always work, so in some cases you have to enter the network settings manually: IP address, subnet mask, default gateway and DNS server. After entering, click “OK”.
This completes the Wi-Fi setup on the laptop. Now go to the “Wireless Networks” tab and click on the “Wireless Networks” button.
We update the list of available networks using the corresponding button.
To connect, we need to enter the “Network Key” that we set when creating the wireless network. We press the “Connect” button and connect to the created network, while the laptop has access to the Internet.
How to set up Wi-Fi on a laptop with windows 7
Setting up Wi-Fi on a computer with seven installed is practically no different from the previously considered example. First of all, we need to go to the “Network and Sharing Center” already familiar to you, then click on “Change adapter settings”.
A network connections window should appear in front of you. The settings procedure itself will be the same as the one we considered for windows XP. We will go to the properties of the wireless connection, then to the properties of the “TCP / IP” protocol and set the network parameters.
After setting up Wi-Fi, you can directly connect to a wireless network. To do this, we log in to the “Network and Sharing Center” and go to the “Connect to a network” section.
We select from the list of available networks the one that we created using the wireless router and click on “Connect”.
Enter the security password and click on the “OK” button.
After that, your laptop will connect to the wireless network and will have access to the Internet.
Setting up Wi-Fi in windows 8
This instruction will help you set up Wi-Fi on a laptop with windows 8 on board. First, go to the “Network and Sharing Center”, then click on the “Change adapter settings” section.
You will be taken to the network connections window. Further, the instruction completely coincides with the steps that we have considered for other operating systems of the windows family. We go to the properties of the wireless connection, then to the properties of the protocol “TCP / IP”, after which we set the network parameters.
We select the network that we created using the router and click on “Connect”.
The system will ask for a password, which we enter in the “Network Security Key” field and click on “Next”.
After that, your laptop will connect to a Wi-Fi network and you will be able to freely use the Internet.
conclusions
We examined in detail how to independently set up Wi-Fi on a laptop with windows XP, 7 or 8. We really hope that you have successfully completed this task. If not, describe the problem in the comments, and we will definitely help you.
computer-info.ru
How to set up WIFI on a laptop? Correct method!
I welcome everyone! Today I will tell you how to set up wifi on a laptop. Setting up wi-fi on a laptop is not a difficult task. The first thing to check is if the device supports this feature. Modern laptops are already equipped with a wi-fi module, but some manufacturers still produce devices without wi-fi support, but these are mostly cheap models.
If your laptop is not equipped with a wi-fi module, you need to get a special adapter. To understand if there is wi-fi on the laptop, it is enough to carefully examine the device case. Usually, manufacturers stick a sticker under the keyboard or at the bottom of the case, which indicates the presence of wi-fi.
In addition, the wi-fi symbol is also located on the functional button of the keyboard, which is responsible for turning on the module. The button should be used together with the Fn key.
Turning on wi-fi on a laptop
The function key for turning on wi-fi depends largely on the laptop model. If this is an HP brand, then you must press the F12 and Fn keys. In this case, the diode should change from red to blue. By the way, if you want to read in detail about how to distribute wifi, then follow this link.
- If it's an Acer brand, then the keys will be Fn and F3. You will see how the connection manager will appear, where you will need to turn on wi-fi or Bluetooth.
- On Asus devices, the buttons will be Fn and F2. A connection icon will appear, there you need to select wi-fi or Bluetooth.
- Toshiba-branded laptops require the Fn and F8 keys to be pressed. The next steps are the same.
- For Samsung, the keyboard shortcut will be: Fn and F12.
To determine the key to turn on wi-fi, the icon in the form of an antenna will help you. If pressing the buttons does not turn on wi-fi, then there may be several reasons for this:
The problem is usually resolved by reinstalling the drivers or the operating system.
What if the laptop does not have a wi-fi module?
Connection to a wi-fi access point is possible using a special adapter, its cost varies from 15 to 30 dollars. You can easily find such an adapter in any computer store. In terms of external dimensions, the device can be compared with a flash drive. The use of the device is similar, just plug it into the USB port.
The disadvantage of an external adapter is a high probability of breakage due to careless handling. This also happens because the part protruding from the laptop remains unprotected. Therefore, the built-in wi-fi module installed in the service center will not cause problems. This solution, although it will be more expensive, but you will feel the comfort of work.
In order to turn on the external wi-fi adapter, you need to press a special button located on the case.
Checking if the drivers are installed correctly
If your drivers are installed incorrectly, then even the access point may not respond to a burning indicator and wi-fi will not work. First of all, in this case, you need to check the performance of the network card. Right-click on My Computer and go to Properties.
Next, go to "Hardware" -> "Device Manager". You will notice the entire list of devices that are installed on the laptop. We need to find the "Network adapters" section, and there we are looking for "Wireless", wi-fi or Wireless. If you see a yellow triangle with an exclamation mark next to the module, then be prepared for the fact that you will need to install a driver for the wireless network card from scratch.
Download drivers from the Internet or use the disk that comes with the laptop. Driver installation is standard and is not much different from installing any program. It is possible that wi-fi will not work immediately, but only after several installations. In order for the adapter to work well and easily detect wireless networks, you must set it to automatically obtain an IP address.
How to set up WIFI on a laptop and how to enable automatic obtaining of an IP address in windows Xp.
So we almost sorted out the question of how to set up wifi on a laptop. But now we need to turn on the automatic receipt of the ip address. For this:
Open the "Control Panel", set the view to classic.
We carry out the transition to "Network Connections", right-click on the required connection, select "Properties". Components will open there, we are interested in the TCP / IP protocol, click again on Properties.
In the window that opens, set the automatic receipt of the IP address, as well as the receipt of the automatic DNS, click OK.
Setting up automatic obtaining of an IP address for windows7
We need to open the control panel, go to "Network and Sharing Center".
In the column on the left, select "Change adapter settings".
A window will open, there you need to make a selection of the required network and right-click on it, select "Properties". There we select the automatic receipt of the ip-address and DNS. Click OK. For windows 8, similar actions are performed.
Connecting to an access point.
After you have enabled wi-fi on your laptop, you need to click on the "Wireless Network Connection" icon in the tray.
You will notice a list of available networks. If you have your own access point, then it will certainly be an adapter. The adapter is also able to find nearby networks, which may belong to your neighbors. You can select any network that does not have a padlock icon. This means that the owner of the network does not mind if someone uses his access point. If you have your own network, then click on it, in the window that appears, enter your username and password that you know.
In addition, there is another option for connecting to the Internet. If any institution nearby has wi-fi, then perhaps the owner will provide you with a password and you will be able to connect to the network if your adapter reaches this distance.
After the network is selected, you must click "Connect". After that, enter the password twice and see the signal and connection speed.
If a warning window appears, close it and try to connect after a while.
After the wi-fi connection is completed, we will see the corresponding icon in the tray.
We open the browser, the page of the service provider appears in front of us. We click on the "Login" button, and we get to the page specified as home in the Internet Options. If the connection often breaks, then the laptop may have been placed in a place where the signal from the wireless network is weak. In this case, you can drag the laptop closer to the access point.
Note! I recently wrote a lot of useful articles and I want you to read them too, namely what error 651 is. But for gamers, I wrote how to increase FPS in games or how to remove write protection on your flash drive.
With Uv. Evgeny Kryzhanovsky