Layout of houses with a veranda. Layout of houses with a veranda On a separate foundation

• The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
• An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm. Steps at the entrance.
• The height of the ceiling of the first floor in cleanliness (from the floor log to the floor beam) - 2.29m (+/- 50mm)
• The second floor is an attic. Clear attic ceiling height (from floor beam to ceiling beam) - 2.25 m
• The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for buildings with an attic).
• In the pediments of one-story buildings, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
• Ventilation hatches are installed in the gables of buildings with an attic (3 pieces for each gable).
• Eaves and roof overhangs 200 mm wide (for one-story buildings) and 300 mm (for buildings with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
• The device of window and door openings with a dressing crown, without the installation of casing bars.
• Loading, delivery up to 400 km from the city of Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the house / bath at the customer's site.

• The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
• Waterproofing - roofing material in one layer.
• Strapping - a bar of natural moisture with a section of 150x100 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with a protective composition.
• Floor logs - a board of natural moisture with a section of 40x150 mm per edge, with a step of 600 mm.
• Draft floor - a board of natural humidity with a section of 22x100mm. Steam, waterproofing - NANOIZOL S.
• Floor insulation - 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier - NANOIZOL V.
• The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
• External walls - profiled beam of natural humidity with a section of 145x90 mm (wall thickness - 90mm) Profile "block house" or straight. There are 17 crowns in total.
• Partitions of the first floor - profiled beam of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
• Mezhventsovy insulation - jute cloth 6 mm thick
• Interconnection - on a metal dowel (building nail 6x200mm, 250mm).
• Corner connection - "in half a tree." The outer corners of the log house are sewn up with clapboard (spruce / pine AB) 17 * 90 mm in two rows.
• An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm filled with carved balusters. Steps at the entrance.
• Terrace floors - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments.
• Terrace ceilings - lining (spruce / pine AB) 17 * 90 mm. Vapor barrier - NANOIZOL V.
• Clear ceiling height of the first floor (floor to ceiling) – 2.25m (+/- 50mm)
• The filing of the ceiling of the first floor - lining (spruce / pine AB) 12.8 * 88 mm. (joint for layout is allowed)
• The second floor is an attic. Clear attic ceiling height (from floor to ceiling) - 2.20 m
• The height of the roof in the ridge is 1.50 m (for one-story projects).
• Floor insulation - 100 mm KNAUF / URSA mineral wool (or equivalent). Vapor barrier NANOIZOL V.
• Attic floors - dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. . Each fifth board is fastened with screws (for the possibility of further flooring).
• Sheathing of the walls and ceiling of the attic - lining (spruce / pine AB) 12.5 * 88 mm (a joint for layout is allowed).
• Attic wall insulation - 100mm ROCKWOOL basalt mats (or equivalent). Vapor barrier - NANOIZOL V.
• Partitions of the attic - a frame made of a bar 40x75, sheathed on both sides with clapboard (spruce / pine AB) 12.5 * 88 mm. Partitions are not insulated.
• Rafters - farms from a board of natural humidity with a section of 150x40mm., 100x40mm. Are established with a step of 900-1000 mm.
• The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for houses with an attic).
• In the pediments of one-story houses, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
• Ventilation hatches are installed in the gables of houses with an attic (3 pieces for each gable).
• Lathing - a board of natural moisture with a section of 22 * ​​100 mm, with a step of 300 mm. Counter-lattice - rail 20 * 40 mm, along the slopes of the rafters.
• Roofing - ONDULIN (burgundy, brown, green) or galvanized corrugated board. Underroofing vapor barrier - NANOIZOL S.
• Installation of a drainage system from the roof (PVC, DEKE). Colors - brown (chocolate), burgundy (garnet), white (ice cream).
• Cornices and roof overhangs 200 mm wide (for one-story houses) and 300 mm (for houses with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
• The staircase to the attic is single-flight, on bowstrings made of planed timber with a section of 145 * 90 mm. Floorboard steps. The handrail and the fence in the attic are a planed bar with a section of 40 * 100 mm.
• Windows - wooden, double-glazed, with a seal and fittings (screw hinges, twist locks). Inward-opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600mm; 600*600 mm. Windows are installed in casing boxes.
• Doors - wooden, paneled, deaf (spruce / pine A). Size (h*w) 2000*800 mm; 2000*700 mm. Handles, hinges. A padlock is installed on the front door.
• Casing bars (swarms) are installed in window and door openings.
• Sealing of corners, joints, junctions - plinth spruce / pine A.
• Finishing of windows, doors - platband spruce / pine A on both sides.
• Nails for fixing parts - construction black.
• Nails for fastening lining - galvanized 2.5x50 mm
• Nails for fastening the plinth, layouts - finishing galvanized 1.8x50 mm.
• Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
• Assembly of the house on the site of the customer.

We have compiled for you a convenient table of differences in the configuration of houses for shrinkage and turnkey.

For garden lovers and avid gardeners, the dacha is a second home. After all, this is an ideal place not only for growing organic crops, but also for relaxing with your family on the weekends. But in order for the cottage to meet the requirements of a modern person as much as possible, you will definitely want to build a house - albeit small, but cozy.

Wood is a material that never gets old!

However, among nature, few people want to build concrete "boxes" that are boring in the city, especially since it is difficult, long and expensive. Meanwhile, a great alternative would be a house made of timber 6x6, the construction of which is characterized by such advantages:

• Speed ​​- special systems for attaching timber allow you to build a box in just a week. And taking into account simple cosmetic work, construction will take no more than a month.
• Cheapness - the tree has always been considered pretty cheap material, besides, the ease of installation of the beam and the absence of the need to use special equipment significantly reduces the cost of construction. In principle, for 500-600 thousand rubles you can build a very cozy and comfortable house for a family of 3-6 people.
• Operational advantages - in wooden houses usually low humidity, thanks to which they practically do not crack and do not rot, despite the fact that the building is able to "breathe" and perfectly retains heat.
• The absence of foundation shrinkage determines reliability and durability country house. In addition, the beam is covered with high-quality varnishes that protect it from decay and deformation caused by precipitation.

Why 6x6 projects?

In principle, 36 squares of area is almost two-roomed flat in Khrushchev, where a family of 3-4 people often lives. Therefore, this area will be more than enough for a country house. The cost of such a house will be 270-340 thousand rubles, depending on the number of rooms and the selected configuration.

However, a more preferable option would be a two-story building or, the cost of which increases by only 20-40%. But in this way you can get a house, where the first floor will be allocated for a living room with a kitchen and a bathroom, and the second floor for bedrooms. For families who love to spend time in friends company, it is such a summer cottage that will be optimal.

Now many interesting projects are being proposed for the implementation of a 6x6 area. For example, a good choice would be. For such an addition, you will have to pay a maximum of 40 thousand rubles, but there will be a cozy place where you can even in cloudy weather have a picnic and enjoy the summer rain.

Therefore, even with economical construction, you can build a house that is ideal for a quiet and peaceful life outside the city.

"Gardener"- this is a project of a one-story country house 6 by 6 meters with a veranda. You will definitely like its appearance and thoughtful layout. The basic plan includes 1 large living room, 2 small rooms and a spacious veranda 6x1.5 m. At the request of the customer standard layout can be changed!

The country house itself: 6x4.5 m. Veranda 6x1.5 m.

Complete set "Turnkey" (which is included in the price)

Our team comes to your site and assembles. Only AFTER you pay for this under the contract.

In just 1 day, you will only have to furnish the house with furniture and lay your favorite rugs! :-)

Foundation From blocks 30x20x20 cm. Can be replaced with a pile.		strapping Beam 150x100 mm. To strengthen the structure.
wall kit At the customer's choice:		floors Grooved board. Chamber drying. Thickness - 35 mm. Logs: timber 100x100 mm.
doors Wooden paneled. Deaf or with glass. Input: 150x200 cm with box. Interroom: 80x200 cm with box.		Window Wooden frames. Single glazing. Stained glass: 50x200 cm. You can add/replace windows: 120x100 cm - 2 doors 70x100 cm - 1 sash. 40x40 cm - window leaf
Roof "Shinglas" - soft roof. Colors to choose from: brown, green, burgundy.		Assembly Included in the price!

Garden house 6x6 with a veranda will provide you with the necessary space for rest and overnight stay. In it you can not only spend time, hide from the weather, but also store inventory. The finished area of ​​​​the living space is slightly more than 24 m 2, the remaining 9 m 2 falls on the porch with a veranda. This project is a real hit!

Additional services

For a comfortable entry. Width: 1 meter. + 2.000 rub As a gift!		To protect against rot and bugs Fire bioprotection "Senezh". You can use your antiseptic. + 11.500 rub
slab base Reinforced plate: 30 pcs. Dimensions: 40x40x5 cm. + 9.000 rub		Additional row of blocks Quantity: 30 pcs Dimensions: 30x20x20 cm. + 6.000 rub
pile foundation Number of piles: 16 pcs. Parameters: 89x2000 mm. There are also piles of 2.5 and 3 meters. + 64.000 rub		Insulation 50-100 mm

We need a Finnish house for a summer residence! My husband and I want to build our own small wooden house. We have a site. Friends suggest buying a Finnish house made of timber. We looked at many options, but we just can’t find a house that suits us - advise The Finnish house 6x8 does not strike the imagination with its size, but it is cozy, well-groomed and there is definitely nothing superfluous in it. Quote - "I really like Finnish one-story projects - I'm a "Finnish" fan. I have been looking at similar projects from the Turku series for a long time - beauty. There are no problems with the sauna / bath, I have a bath in the house myself, children will cause dirt even with a vestibule ", even without. Inconvenience - there is no boiler room at the house. But in Finnish standard ones this is usually not the case, since there is no such problem." 5 bedrooms in the project of the house - this is a real country estate! Frame house "COUNTRY DREAM". Cost - 2.125.640 rubles. Dimensions: 10.100 x 11.200 Total area - 201.85 m2. The house has: five bedrooms, two bathrooms, a living room combined with a kitchen, an entrance hall, a utility room, two terraces of 37 m2. An individual version of the layout of the house with a bath is possible. The project and equipment on the site - http://domaizkomi-2.ru/zagorodnaya-mechta The most significant buildings in Russia were erected from old logs harvested from trees that are several hundred years old. The only criterion for the size of the building was the size of the log - its length and thickness. Wooden huts built of logs were popularly called "log cabins". ... The simplest houses are four-walls, the dimensions of which depend on the length of the log. Splicing of logs along the length was not used, and if it was necessary to enlarge the room, then several log cabins were simply placed nearby. More complex six and eight-wall structures were used in the construction of churches and temples. As a rule, Russian huts were quadrangular.  House made of chopped logs "Terem" A good and high-quality wooden sauna now is not a luxury, not prestige, but the health of us and our family. Sauna made of chopped logs "BAKOVKA" Cost - 413.250 rubles. PACKAGE - WINTER Bath size: 4.000 x 5.000 Total area: 20.0 m² Design and equipment on the site - http://domaizkomi-2.ru/banya-iz-rublenogo-brevna-bakovka Northern forest - Komi Republic, Kirov and Vologda regions. Houses made of gun carriage (semi-oval log) have always been considered the "privilege" of the Russian village. Skilled carpenters in a wooded area created masterpieces of wooden architecture. In addition, the carriage is characterized by the following advantages: an increase in the useful area of ​​\u200b\u200bthe premises due to the flat surface of the wall (thickness 15-20 cm); during Russian cutting, round logs form a wall of unequal thickness (on average 22 - 30 cm); ease of installation of electrical wiring and other communications. Bath from the gun carriage "RUMYANTSEV". The cost without finishing is 348.750 rubles. Size - 5.000×5.

Today I would like to introduce you to a practical project of a 6 by 6 meter frame house with a terrace. The exterior of the house is made of imitation logs.

The dimensions of the terrace are 2 x 6 meters. The foundation of the building is pile-screw, which is very convenient on difficult soils.

House layout

The first floor consists of 4 rooms - a vestibule, a kitchen, a bathroom, a living room. In this case, it is quite acceptable to adjust the area of ​​​​each of them.

The layout of the attic floor is simple and convenient - on both sides of the gallery there are two rooms with windows. They can be used as bedrooms, or as a bedroom and study.

Step by step photos of building a house

A total of 12 screw piles are needed. The lower harness is made of timber.

Wood is treated with protective compounds. The next stage is the construction of the frame of the future floor.

Wood is also treated with protective compounds.

Outside, the frame is sheathed with an imitation of a log. It turns out very stylish and beautiful.

Starting construction in the spring, by the summer you will be living in a new house.

The main advantage of frame-type houses is their quick construction and the relative cheapness of construction.

The process is moving - the transition to the construction of the roof.

Pay attention to the principle of erecting attic rafters.

Now the crate of the house is ready.

The roof of the house is covered with ondulin.

The open terrace is also covered with ondulin - in fact, this is correct, since the metal roof also gives condensation and the rain knocks on it very noisily.

The space under the floor is insulated with mineral wool 150 mm thick.

A rough floor will be laid along the logs.

On top of the draft is already fine.

The house is clean, cozy and warm.

A beautiful country frame house 6 by 6 meters with a terrace and a residential attic.

The railing has already been made and the ladder from the porch is ready. The only remark - I would recommend making the stairs more comfortable!

And this is a photo of the staircase that leads to the attic.

Look how clean the house is! The beauty of a living tree is incomparable!

The house breathes, is built from environmentally friendly material, the cost is very budgetary.

The project of the individual entrepreneur Smirnov A. B. - bk53.ru/doma_foto/1182-dom-6h6-s-terrasoy.html

Related videos

Discussion is closed.