Hello dear reader! I will tell you about the nuances of installing a dishwasher under the countertop. There is a lot of information on the network about connecting the machine to communications, but the topic of integration into a kitchen set is not disclosed. Although the topic deserves a separate article.
Thank God, experience in installing a dishwasher in the kitchen is enough to eliminate unnecessary movements and thoughts on your part. You will know exactly what to do. The result is a well-executed installation.
- Dishwasher niche dimensions
- Dishwasher bracket
- The correct location of the dishwasher in the kitchen
- What to do with the plinth under the dishwasher
- Related video
- Conclusion
First I want to warn you that you should not take my recommendations as exclusively correct. I will talk about the mistakes and conclusions that gave me an excellent result. I would be glad if you in the comments, share your solutions.
Dishwasher standard dimensions
Built-in dishwashers come in 448 mm and 598 mm widths. The standard height for all built-in machines is 818 mm. Depth from 550 to 570 mm, mainly at 550. Standard depth of the lower modules.
When installing the dishwasher under the countertop, I use supports with a height of 100-120 mm on the lower cabinets, with a case height of 720 mm. I used to think that 150 mm legs were needed, but after several installations I saw that 100 mm was enough.
Built-in dishwasher dimensions
I want to draw your attention to for p / m. It shouldn't be in the niche! Otherwise, the car simply won't fit. It is better to place it behind the adjacent module with boxes, pulling out which we will gain access to the outlet.
The niche must be completely hollow. Those. no connecting strips between the cabinets, no sidewalls, bottom and back wall. The dishwasher completely fills the allotted space. See the photo above for the dimensions of the niche.
How to install a dishwasher in the kitchen
Initially, you should definitely level the device in three planes. Adjustable legs are provided for these purposes. Moreover, the rear leg can be adjusted with a screwdriver from the front side. Align flush with headset housings.
Opening the car door, pay attention to the side plugs. We take them out and attract the dishwasher, through the holes that have appeared, to the neighboring modules. We use self-tapping screws with a length of 35-40 mm. We put the plugs in place and close the door.
Within walking distance from you, located according to the calculation of cabinet furniture.
Dishwasher location in the kitchen
Now all the attention is on the placement of the device in the kitchen. The most convenient, in my opinion, in a pencil case. When the machine is raised to waist level, no need to bend down. Communications must be nearby so that the pumps do not wear out.
Try not to put the car on the edge of the headset. Because in this case, it will be necessary to calculate the additional sidewall. Moreover, the facade of the dishwasher will be internal relative to this sidewall. Otherwise, it will be blocked.
To place the machine under the hob, the worktop must be no thinner than the body of the hob. The supports on the headset must be h150 mm, for the ventilation gap between the hob and the dishwasher. Reliable electrical insulation.
How to install the facade on the dishwasher
To be honest, I never use printed templates for marking bindings. After several unsuccessful attempts, I abandoned this case. I feel sick from the sight of these charts and tables. Developers still have work to do.
The first step is to screw the handle onto the facade. How to fix handles in the kitchen, I told. Get an asterisk bit or 35 mm self-tapping screws. Once I "beamed" the facade, in the absence of a bit and 35 self-tapping screws. He pierced the facade with magpies.
After installing the machine in a level, I measure with a square from neighboring pedestals, taking into account the gaps, the exact distances to the mounting holes. I transfer them to the facade, core and fix them with the car door open. I adjust the gaps with my feet.
Within walking distance from you, located according to the calculation of cabinet furniture.
Plinth under the dishwasher
And finally, let's figure out what to do with the base. When opening the facade, the lower edge touches the plinth. I tried to drown my legs by 50-60 mm, no result. The shuffling is still there. Drowning by 70 mm is ugly and unsafe for the structure.
Therefore, the only correct decision is to make a drank in the upper part of the base 20-30 mm. At the location of the dishwasher.
Conclusion
Now you can install a dishwasher in your kitchen with the ease of a professional. It is enough to study the article in detail and apply the knowledge gained. Good luck to you!
If you need detailing cabinet or built-in furniture,. We will certainly discuss the terms of cooperation and come to a consensus. For a moderate percentage for my work, I will prepare a detailed project for you on time.
What would you like to add to this article?
Tell me about your experience in the comments.
I would love to hear your stories!
With good thoughts about you, always in sawdust 🙂
Rekun Dmitry.
How to choose a cabinet for a dishwasher? Few people think about it in advance, even before installing the kitchen set. If you have a finished kitchen and need to install a new dishwasher in it, then in this article you will find some tips. Let's choose a convenient place for equipment together.
Accommodation features
The width of the dishwasher body can be 45-60 cm. These are narrow and full-size models with a capacity of 10-15 sets. There are also compact PMM, which can wash from 4 to 6 sets of dishes in one cycle.
To integrate appliances into a standard kitchen (like Ikea), you can choose the following options:
- Install the appliance in a niche under the sink.
- Install the equipment in the cabinet reserved for cereals and pots.
- Place the PMM in a hanging pedestal.
You can arrange a dishwasher under the sink. For this, a compact model with a width of 45 cm and a height of 50-60 cm is suitable. Think in advance whether the capacity of the dishwasher is enough. You can load the machine several times a day, but then you will not be able to use resources profitably.
See an example in the photo:
For the built-in PMM, the option with a cabinet is suitable. You can simply pull out one of the headset items, and install a typewriter in its place. But since we are talking about embedding in a headset, the contents of the cabinet can be redone, making room for technology.
What cabinet do you need? Make sure that the width and height of the niche is 5-10 cm larger than the dishwasher body. This is necessary for normal ventilation.
Some users decide to install a PMM in a hanging cabinet. This is possible if there is no other option. This solution has more disadvantages than advantages:
- Fastening furniture to the wall must be strong and reliable in order to withstand the load.
- Communications to the water supply will look unaesthetic on the wall.
- Loading dishes will be inconvenient.
Choosing a cabinet for PMM
First of all, you need to consider the location of the outlet where you connect the PMM. The cabinet should be close to the network. We wrote more about this in the publication " Dishwasher outlet". Let's recap the important points:
- The outlet with a moisture-resistant housing should be located at a height of 45 cm from the floor.
- Grounding is provided.
- The connection is made via difavtomat.
Not prepared wiring and a separate outlet? Then it is better to start with the organization of electrical communications. As well as:
- It is advisable to choose a cabinet near the sink. The length of the hose when connected should not exceed 1.5 m - this is an additional load on the drain pump.
- The prepared niche should be at least 5 cm larger than the dishwasher.
Prepare a place for a built-in machine.
How to make a dishwasher cabinet
You have already chosen the installation site, it remains to organize everything so that the appliances fit into the cabinet or under the countertop. If you decide to install a freestanding machine, it is easier to dismantle one cabinet from the headset, and put a PMM in its place.
If you have chosen the built-in technique, you need to redo the niche:
- Use a screwdriver to unscrew the screws that secure the cabinet to the countertop.
- Remove the fasteners connecting the dishwasher to the adjacent ones.
- Move the cabinet to an empty space.
- Take out the inner shelves, dismantle the back and top panels. The side walls and front part should remain.
- Do the same for the front and rear plinth. Only the side elements should remain.
- Prepare holes in the side panel for the outlet of the hoses. Do this from the side where the sink is located so that the connection is simple and convenient.
- It remains to install the walls and the plinth and fasten them with ties.
Tip: to prevent the wooden countertop from being damaged by steam from the dishwasher, attach a metal sheet to the inside. It usually comes with built-in machines.
The preparatory work has been completed. We proceed to the connection stage.
How to install a dishwasher
It remains to put the PMM in place and connect it to the water supply and drain. If the dishwasher legs were adjusted before delivery, then lower them. Slide the body into the prepared area. Twist the legs in height. Use the fasteners that come with the kit to further secure the machine and immobilize it during operation.
- Connect the drain and fill hose to the housing.
- Pass them through the holes you made.
- Connect the drain hose to the siphon.
- Connect the intake hose to the water supply. Seal all connections with fum-tape and clamps.
- Connect the plug to the socket and make a test run.
Conclusion: you can install a dishwasher in the kitchen with your own hands in a few hours. During the first start, see how the water is poured and drained, whether the equipment is firmly fixed. Watch the video
June 13, 2017Specialization: master in the construction of plasterboard structures, finishing work and laying flooring. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.
Not sure where is the best place to install a dishwasher and how to do the job right? I will talk about all the nuances of the optimal location of the equipment, as well as describe all the subtleties of the installation process on my own.
To choose the best option for household appliances, you need to know what types it is. In addition, you need to determine in advance where the machine will be located, since both its size and installation options depend on this.
Equipment types
There are four main options for this technique:
- Built-in dishwasher. It is completely hidden behind the facade of the kitchen and is not visible from the outside. This is the most inexpensive option, the appearance of which, in fact, is not important, the main thing in this case is the dimensions, they should ideally fit the space that is available;
- Equipment with external control system. These options have all the adjusting elements and buttons on the outside. This provides ease of use, but significantly complicates the installation process, because the panel is attached to the furniture facade and connected separately. It is better to entrust the installation of this option to specialists in order to avoid problems;
- open systems. This option differs from the previous ones in that the front of the structure is not covered by anything and is visible from the outside. Accordingly, the facade is made attractive and is selected for the overall design of the kitchen. Price this group of products is the highest, but it is easier to install them, because the structure is located on the floor and does not need to be covered with decorative elements;
- desktop version. If you don’t know where to put a full-sized machine in a small kitchen, then a desktop modification can be an excellent way out. It takes up minimal space and is very easy to install. The main thing is that a socket and a drain system be connected.
To decide where to install your dishwasher, consider a few important guidelines:
Illustration | Description |
Do not place the dishwasher near other household appliances. The minimum distance from the gas stove or refrigerator should be at least 15 cm. And it is better to make an indent of 40 cm at all, that is, install any kitchen cabinet between the two elements. Close proximity adversely affects the electronics and reduces the life of the seals. |
|
It is better to place the structure between two cabinets. This is necessary so that the mount is strong on both sides. If you put the dishwasher in the outer cabinet, then it will be rigidly fixed only on one side, which is highly undesirable.
|
|
It is best to place the machine near the sink. This will greatly simplify the process of connecting equipment to the sewer, you will only need to buy a splitter to connect to the siphon or sewer outlet. At the same time, for a left-hander it is better to place the equipment on the left, and for a right-hander on the right, but this is already a matter of comfort, not functionality. |
|
Detergents should be on hand. A cabinet with household chemicals for a dishwasher should be located nearby, otherwise you will always have to go for funds every time you turn on the equipment. | |
Provide a proper layout of communications. Water supply, sewerage and electricity - without this, the operation of the equipment is impossible. The socket is located so that when you turn it off, you can easily get to it. The socket must be grounded - this is a prerequisite for the safe operation of electronics.
|
|
Storage area should be near. It's best to have a cabinet for dishes and everything above or to the side of the dishwasher so you can stack clean items while standing still. This is a very important nuance that directly affects the usability. |
Mounting Features
Let's see how the equipment is installed. I will cover how to install a dishwasher in a finished kitchen as it is a more advanced option. New furniture always has a compartment of the required size, while installation in an existing structure involves a number of additional works.
Do-it-yourself instructions look like this:
Illustration | Stage description |
Unpacking equipment. Before you put the machine in place, you need to free it from the packaging and carefully study the instructions. It will give basic recommendations for installation, which must be followed for high-quality work. | |
Free up space. You yourself must figure out how to dismantle the old locker. Sometimes it may be necessary to remove the countertop, but in our case it was just necessary to remove the doors. We already have an outlet, if yours is not connected, then this should be done at this stage. In order not to puzzle over how to integrate the dishwasher into the finished kitchen, so that the design turned out neatly, it was decided to buy an open version. The facade is not needed on it, which simplifies installation. |
|
Measurements are being made. The machine is bought according to the dimensions, but in order to set it accurately, you need to know the height of the opening to the nearest millimeter. | |
Legs are adjustable. Set the height so that there is only 3-4 millimeters between the tabletop and the equipment. | |
Drill holes if necessary. Both the water supply hose and the drain are pulled through them. The diameter and location depends on the size of the communications and the equipment model. The exact position is up to you. | |
Communications are stretched. The cable is connected to the outlet, and the inclusion of the machine is checked. If everything is fine, you can continue to work. | |
All hoses are connected. For reliability, all joints are pulled together with steel clamps. | |
The car moves into place. Carefully place it in the opening and set it in the desired position. Pre-check the plane with a building level, adjust the legs if necessary. | |
Attaches to side cabinets. The photo shows the location of the fasteners, they are standard for all models. | |
This is what the result looks like. We figured out how the dishwasher is built into the existing kitchen, if you have new furniture, then everything will be even simpler, there will initially be an opening of the required size. |
Conclusion
You learned what types of dishwashers are available, how to choose their optimal location and how to install them without help. The video in this article will reveal the topic even better, and if something is not clear to you, ask in the comments.
Many housewives choose a dishwasher not only for saving time on daily housework, but also for economical water consumption. If repairs are not planned in the near future, then you can install the equipment directly into the headset. Built-in appliances have a number of advantages: installation in a finished kitchen does not spoil the design idea, the device is hidden behind a piece of furniture, even a man who does not have sufficient experience can handle the installation. To do this, you need to decide where to embed the device, calculate the geometric parameters of the niche, and select the model of the device. With a long-awaited purchase, the question arises: how to integrate a dishwasher into a finished kitchen? This article will help you install the device so that the equipment works for a long time and without failures.
To embed the device, you need to correctly determine the location of the equipment: the section opening must correspond to the dimensions of the machine box, the means of communication are located nearby. Experts offer several options:
Equipment type | Place for dishwasher | Advantages | Flaws |
Partially embedded and fully embedded | Under the sink in the sink | The depth and width of many models coincides; proximity to sewer water communications | It may be necessary to rework the lower part of the sink; buying a new siphon |
Floor cabinet | The instrument panel is hidden behind a decorative facade | The need to remodel a piece of furniture | |
Dismantling a niche in the kitchen | Selection of the panel according to the color of the furniture facade | Reduced storage space for kitchen utensils | |
Compact Models | For a stand-alone household appliance | Easy installation | The need to take into account access to communications; technology reduces the space in the room |
Thus, it is easiest to fit compact models into the finished kitchen.
Basic components for embedding
Below is a rough list of what you need to get started:
- A set of tools (nippers, Phillips screwdriver, drill, self-tapping screws, building level).
- To connect the pressure water hose you will need a brass water tee.
- Sealing material (tow, rubber fum tape, gaskets).
- Ball valve.
- Siphon in the event that the equipment is installed in the sink.
- Clamps, crimp sleeves
Important! To install a separate outlet, you will need a two-core copper wire with good insulation. Choose a waterproof outlet.
Instructions for installing the unit in a ready-made headset
The most suitable option for embedding a dishwasher is to remake the kitchen floor cabinet. To do this, you need to follow certain steps.
Preparing the place:
- unscrew the screws holding the countertop;
- unscrew the ties that fix the side and rear walls with the surface of the nearest cabinets;
- draw out a piece of furniture;
- disassemble the cabinet, leaving only the side walls with doors;
- using a drill and a bit, drill holes in the side wall for two hoses: a water supply and a sewer hose, as well as for electrical wiring.
Dishwasher Installation Diagram
Install plinth side elements:
- take the metal tie;
- install each wall separately.
Installing the built-in device:
- remove connecting hoses, power cable;
- slide the device into the resulting niche;
- insert hoses and wiring into the holes;
- use adjustable feet in order to put the built-in machine in a horizontal position;
- connect the discharge hose to the sewerage system, and the cold water supply element with a brass tee to the pipe;
- in case of additional fastening of the hose on the wall, use anchor clamps;
- connect the device to the socket;
- attach the plinth faceplate in place.
If you didn’t succeed in integrating the dishwasher, don’t worry - study the installation instructions for your model, as a last resort, there is always the opportunity to contact specialists.
In order for the built-in machine to work for a long time, not to flood the neighbors, listen in advance to some tips:
- check availability grounding- this will prevent electric shock;
- make sure that the drain hose is not more than 2.5 m - increased load adversely affects the operation of the pressure pump;
- it is not recommended to embed the appliance under the hob;
- for countertop protection from steam, think about protection, a metal plate is perfect for these purposes.
Now you have an idea how to integrate a dishwasher into the kitchen. To install appliances in a finished kitchen set, you will need not only ideas where to embed the device, but also skills in working with plumbing and locksmith tools.
Today, many housewives are faced with the question of how to integrate a dishwasher into a finished kitchen? This problem is common to many families with old furniture.
A few years ago, such household appliances were considered a luxury item. People installed kitchen nooks without thinking about the dishwasher. Today, when this device has become available, there are more and more people who want to buy it. Installing a dishwasher will save not only time and effort, but also water consumption. With existing tariffs, this is a weighty argument.
However, finding a place for overall household appliances in a small kitchen is quite problematic. You can use the services of specialists, but this will require additional costs. Self-embedding the unit will save a considerable amount. To perform this process correctly, you must carefully study the instructions for the device and correctly install it. Such work can be carried out by any man who has a set of household tools and has experience in handling them.
Today, many housewives are faced with the question of how to integrate a dishwasher into a finished kitchen.
How to choose a dishwasher
Today, this type of household appliances is presented in a wide range from domestic and foreign manufacturers. The most important difference between the equipment is its size and configuration.
The following types of equipment are presented in outlets:
- Desktop. Installed directly on the table top. They have the smallest size and internal volume. An excellent choice for a small family. If the parameters of the kitchen corner allow, then desktop models are installed directly in one of the cabinets.
- Stand alone. The most dimensional products in the line of this type of equipment. They can be placed in any free space in the kitchen, as they have a decorative finish on the sides, on the facade and on the top panel. As a rule, they are installed under the countertop between cabinets.
- Embedded. Such models are the most popular. This is justified by the fact that after installation, the appearance and integrity of the kitchen corner does not change. The design and beauty of the facade is preserved, which affects the harmony of the interior of the entire room. After fixing the unit in a niche, it is simply closed with kitchen cabinet doors.
Today, this type of household appliances is presented in a wide range of domestic and foreign manufacturers.
Since today it is the presentability of the kitchen that is at the forefront, it is advisable to dwell on the built-in model. Such a solution will allow you not to clutter up the room and not spend money on buying new furniture.