Test your strength

• Online tests
• Online computer science tests
• Online Physics Tests
• Online math tests
• Online tests in Russian
• Occupation Tests
• Is an industrial designer right for you?
• What kind of economist are you?
• Test "Professional suitability"
• Do you want to become a cyber cop?
• Educational quizzes
• Physics test on the topic "Problem Solving" (Grades 7-9)
• Final test in mathematics (grade 6)
• Informatics test for grades 10-11
• Processing materials by pressure, or how to bend a lamppost.
• Informatics test for grade 5 "Information around us"

Occupation Tests

• Profession choice matrix (G.

Instrument fitter: what kind of profession, ranks, training

Adjustment, testing and delivery of blocks of medium complexity and power systems, instruments and information-measuring systems; checking the electrical parameters of the regulated equipment using instrumentation.3. Drawing up layout diagrams for regulation and testing of complex mechanisms, devices, systems. Requirements for education and training. Secondary vocational education - training programs for skilled workers (employees).
Requirements for practical work experience. At least one year of work on the second qualification level in the profession "Mechanic-adjuster of instrumentation and automation". Special conditions for admission to work.

Vacancies and work: “Kipia adjuster” in st. petersburg

To carry out heat treatment of low-responsibility parts with their subsequent fine-tuning; 7. Determine the hardness of the metal with calibrated files; 8. Repair, adjust and adjust especially complex instruments and devices under the guidance of a more highly qualified locksmith; (hereinafter - the general qualification requirements given in the qualification characteristics for the 2nd category, section "must be able", paragraphs.

7-12.). CURRICULUM for retraining and advanced training of workers in the profession "Mechanic for instrumentation and automation" of the 3rd category Training period 2 months No. p / p Content (courses, subjects) Number of hours 1 General technical course 54 1.1 Fundamentals of a market economy 4 1.2 Electrical engineering 10 1.3 Materials science 8 1.4.

Adjuster of instrumentation and automation

Important

Basics of mechanics and electronics in the scope of the work performed (hereinafter referred to as the general qualification requirements given in the qualification characteristic for the 2nd category, section "must know", paragraphs 8-13). A locksmith for instrumentation and automation of the 4th category must be able to: 1. Repair, adjust, test, adjust, install and commission complex - electromagnetic, electrodynamic, heat-measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with adjustment and fine-tuning of critical parts and assemblies; 2.

Perform configuration and adjustment of relay protection devices, electrical automation, telemechanics; 3. Determine the defects of the repaired devices and eliminate them; 4. Perform metalworking of parts according to 7-10 grades (8-3 accuracy classes) and assembly of gears and worm gears; 5.

Compile and assemble complex wiring diagrams; 6.

Work as a fitter of instrumentation in st. petersburg

Qualification — 6th grade A locksmith for instrumentation and automation of the 6th grade must know: 1. The device, the interaction of especially complex devices, the technological process of their assembly and adjustment methods; 2. Electrical thermal diagrams of thermal automation devices; 3. Device and methods of alignment of complex control and adjustment devices; 4. Properties of optical glass, metals and auxiliary materials, conductors, semiconductors used in instrument making; 5. Fundamentals of calculation of gears of various gearing profiles and optical systems; 6.
Fundamentals of physics, mechanics, telemechanics, heat engineering, electrical engineering, metrology, radio engineering and electronics in the scope of the work performed: (hereinafter - the general qualification requirements given in the qualification characteristic for the 2nd category, section "must know", paragraphs 7-12) .

Mo

Adjustment of simple electronic heat engineering devices, automatic gas analyzers, control and measuring, electromagnetic, electrodynamic mechanisms with fitting and fine-tuning of parts and assemblies.2. Adjustment of control circuits for contact-relay, ionic, electromagnetic and semiconductor electric drives.3. Testing and delivery of elements and simple electronic components with the removal of characteristics.4.
Drawing up and layout of simple and medium complexity schemes. Requirements for education and training. I. Secondary general education. II. Vocational training programs for the training of skilled workers.
Special conditions for admission to work.
The presence of the II qualification group in electrical safety. Passage by the employee of fire-fighting briefing. Passage by the employee of briefing on labor protection at the workplace. established by the legislation of the Russian Federation. Instrumentation adjuster of the 4th category Instrumentation adjuster of the 4th category Generalized labor function. Adjustment, verification and commissioning of complex schemes. List of labor functions. 1. Adjustment, verification and commissioning of complex schemes of industrial automation, telemechanics, communications, electronic-mechanical testing and electro-hydraulic machines and stands equipped with information-measuring systems.2.

Availability of a qualification group for electrical safety Passage by the employee of fire safety briefing Passage by the employee of briefing on labor protection at the workplace Passage of mandatory preliminary (upon admission to work) and periodic medical examinations (examinations), as well as extraordinary medical examinations (examinations) in the manner prescribed the legislation of the Russian Federation. Instrumentation adjuster of the 5th category Instrumentation adjuster of the 5th category Generalized labor function. Adjustment, adjustment and commissioning of complex instrument systems and equipment control systems based on microprocessor technology.

List of labor functions. 1. Adjustment, adjustment and commissioning of complex systems of instruments and equipment control systems based on microprocessor technology.2.

Instrument fitter 2nd category

Attention

QUALIFICATION CHARACTERISTICS Profession - mechanic for instrumentation and automation. Qualification - 2nd category. A locksmith for instrumentation and automation of the 2nd category must know: 1. Purpose, design and principle of operation of the repaired devices, mechanisms; 2.

Schemes of simple special adjustment settings; 3. The main properties of conductive and insulating materials, the purpose and rules for the use of the most common universal and special devices of medium complexity and accuracy of the control and measuring instrument; 4. Basic information about tolerances and fits, qualifications (accuracy classes) and roughness parameters (machining cleanliness classes); 5. Varieties and types of anti-corrosion oils and lubricants; 6. Name and marking of processed materials; 7. Fundamentals of electrical engineering in the scope of the work performed; eight.

Instrument fitter etc

The profession of a mechanic dealing with instrumentation is becoming more and more relevant every day. What is the reason? This will be discussed further. Who is an I&C engineer? Almost any enterprise has a variety of different instruments, sensors, meters and other technical devices. All such equipment must be supervised by someone.

The instrumentation adjuster is the very specialist who is able to control the safe and efficient operation of all devices available in the production. So, a professional is obliged to conduct a periodic inspection of the equipment, its high-quality repair or replacement. It should be noted right away that the profession in question is not so simple.

After all, a competent specialist must have a fairly wide range of knowledge, skills and abilities. Without all this, it will not be possible to carry out their work functions qualitatively.

rb instrumentation etks

Geography932

• History2322
• Literature1367
• English language 1948
• German579
• Tatar language520
• MHK201
• Astronomy20
• Technology180
• Physical education239
• OBJ100
• Economy80

All Items25131 Question Board Popular Questions

• Krivtsov Maxim: Transfer to MDK (Moscow Road College) from LKTiDH (Lipetsk College of Transport and Road…0
• Kolesnikova Arina: ege 20181
• karolinane:Admission to university2
• Mukha Maxim: transfer to study at a Russian university1
• Novikova Olga:Admission to the faculty of journalism1
• Anastasia Adamenko: How to become a tourism manager1

Ask a question5404 questions asked Reviews about universitiesMoscow

• StudentNational Research University "MPEI" I am satisfied with the university) The teachers are good, they are looking for an individual approach to everyone.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 2 of issue No. 2 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45
(as amended by the Order of the Ministry of Health and Social Development of the Russian Federation of November 13, 2008 N 645)

Locksmith for instrumentation and automation

§ 92. Locksmith for instrumentation and automation of the 2nd category

Characteristics, works. Repair, adjustment, testing and commissioning of simple, magnetoelectric, electromagnetic, optical-mechanical and heat measuring instruments and mechanisms. Locksmith processing of parts according to 12 - 14 qualifications. Determining the causes and troubleshooting of simple devices. Installation of simple wiring diagrams. Winding springs from wire in a cold state, protective lubrication of parts. Repair of devices of medium complexity under the guidance of a more highly qualified locksmith.

Must know: device, purpose and principle of operation of repaired devices, mechanisms; schemes of simple special adjusting installations; basic properties of conductive and insulating materials and methods for measuring resistance in various links of the circuit; purpose and rules for the use of the most common universal and special devices and instrumentation; system of admissions and landings; quality and roughness parameters; grades and types of anti-corrosion oils and lubricants; name and marking of processed materials; fundamentals of electrical engineering in the scope of the work performed.

Work examples

1. Ammeters, voltmeters, pressure gauges, galvanometers - medium repair and adjustment.

2. Carriage scales - processing of various parts.

3. Commercial scales, mobile and stationary (mortise) - replacement and repair of platform flooring and weight holders.

4. Weights trade and conditional - repair and delivery under branding.

5. Details simple to devices - metalwork with threading in through holes.

6. Frames for transformers - manufacturing.

7. Gear wheels with a futor - picking.

8. Cinema and cameras - change of eyepieces, locks, caps, repair of frame counters.

9. Magnetic contactors and starters - medium repair.

10. Technical pressure gauges - assembly.

11. Millivoltmeters - medium repair, verification and delivery after testing.

12. Relay base - template assembly.

13. Instruments - setting to mechanical zero.

14. Trailers, binoculars, spotting scopes - repair and adjustment.

15. Piezoacoustic transducers, electromagnetic sensors - medium repair.

16. Copper conductors for resistances - billet.

17. Regulators, distributors and large relays - repair.

18. Copper and platinum resistance thermometers - assembly and calibration.

19. Contact thermocouples - assembly and adjustment.

20. Clamps of complex configuration - manufacturing.

21. Gears, bushings, mounting rings and other parts - pinning on rollers, drilling and reaming holes for pins.

§ 93. Locksmith for instrumentation and automation of the 3rd category

Job Description. Repair, assembly, verification, adjustment, testing, adjustment, installation and commissioning of heat-measuring, electromagnetic, electrodynamic, counting, optical-mechanical, pyrometric, automatic, self-recording and other devices of medium complexity with the removal of circuits. Locksmith processing of parts according to 11 - 12 qualifications with fitting and fine-tuning of parts. Drawing up and installation of schemes of connections of average complexity. Instrument coloring. Soldering with various solders (copper, silver, etc.). Heat treatment of parts with their subsequent fine-tuning. Determination of metal hardness with calibrated files. Repair, adjustment and adjustment of particularly complex instruments and apparatus under the guidance of a more highly qualified locksmith.

Must know: device, purpose and principle of operation of repaired and adjusted instruments and devices; state standards for testing and commissioning of individual instruments, mechanisms and devices; basic properties of metals, alloys and other materials used in repairs; electrical properties of conductive and insulating materials; methods of heat treatment of parts with subsequent finishing; influence of temperatures on measurement accuracy; symbols of shut-off, control safety valves in thermal schemes; rules for installing narrowing devices; types of laying impulse pipelines; installation of leveling and separation vessels; system of tolerances and landings, qualifications and roughness parameters.

Work examples

1. Ammeters, voltmeters, galvanometers, millivoltmeters, pressure gauges, electric meters, gearboxes - overhaul and adjustment.

2. Adding machines and typewriters of all systems - current and medium repairs.

3. Barometers - aneroids - repair and adjustment.

4. Technical scales - repair.

5. Commercial and automobile scales with a yoke indicating device - current and medium repairs, checking hardened steel parts of the scales, bending, grinding prisms, pillows and earrings.

6. Working weights - check on control scales.

7. Hydraulic sensors - pressure testing, repair.

8. Piezoacoustic sensors - overhaul, adjustment.

9. Details simple to devices - threading in blind holes.

10. Cinema and cameras - complete disassembly of shutters, repair of self-timers, setting lenses to focus, correcting apertures, adjusting pick-up coils.

11. Rings, ball holders - manufacturing.

12. Sorting magnets - production with installation on the machine.

13. Tubular pressure gauges - repair.

14. Micrometers with a division value of 0.01 mm - disassembly, fine-tuning of the microscrew, heel planes, nuts, as well as assembly and verification by plane-parallel end measures and interference glasses.

15. Potentiometers - disassembly, cleaning, assembly of the kinematic circuit.

16. Devices for electrical, electromagnetic and electrodynamic systems - overhaul.

17. Prisms - fine-tuning after hardening of simple guides.

18. Flow meters, time relays, mechanical float mechanisms - repair and adjustment.

19. Stereo distance meters, commander's pipes - repair and adjustment.

20. Tachometers - repair.

21. Thermocouples - installation.

22. Traction and pressure gauges - repair.

23. Electric chains - continuity.

§ 94. Locksmith for instrumentation and automation of the 4th category

Job Description. Repair, adjustment, testing, adjustment, installation and commissioning of complex electromagnetic, electrodynamic, heat-measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with fitting and fine-tuning of parts and assemblies. Adjustment and adjustment of the device of relay protection, electroautomatics, telemechanics. Determination of defects of repaired devices and elimination of them. Locksmith processing of parts according to 7 - 10 qualifications and assembly of gear and worm gears. Drawing up and installation of complex schemes of connections. Calculation of the absolute and relative error in the verification and testing of devices. Drawing up defective statements and filling out passports and certificates for devices and machines.

Must know: device, principle of operation and methods of adjustment of repaired and adjusted complex devices, mechanisms, devices; purpose and methods of adjustment of control and measuring and control and adjustment instruments; methods of adjustment and calibration of instruments and apparatus and rules for taking characteristics during their testing; rules for calculating resistances; schemes of complex connections; rules for calculating absolute and relative errors when checking and testing devices; designations of thermal and electrical circuits and drawings; system of admissions and landings; quality and roughness parameters; fundamentals of mechanics and electronics in the scope of the work performed.

2. Film projection equipment - replacement of individual components and parts.

3. Adding machines and typewriters of all systems - overhaul and restoration.

4. Accurate analytical scales - repair, adjustment.

5. Scales bunker elevator - current, average and capital repairs, adjustment and check.

6. Commercial and automobile scales with rocker indicating devices - overhaul.

7. Scales for commodity and automobile scales with a dial pointing device - overhaul, medium and current repairs.

8. Scales mortise commodity mobile and stationary - current, average and capital repairs, installation, adjustment, check.

9. Viewfinders - repair, adjustment.

10. Water meters of all systems and all diameters in wells - installation with switching to other diameters, medium repairs.

11. Rectifiers - revision and repair.

12. Self-recording galvanometers and logometers - disassembly and repair.

13. Cinema and photographic equipment - repair of synchronizers; diaphragms of deceleration mechanisms, rangefinder adjustment.

14. Gear wheels - finishing the keyway with a nozzle on the axle.

15. Magnetic contactors, marine starters - medium repair.

16. Clock mechanisms of all kinds of instruments (pressure gauges, traction gauges, etc.) - overhaul with the manufacture of parts and adjustment.

17. Microscopes - repair with fine-tuning of parts and alignment.

18. Pressure gauges and indicators - disassembly, repair, assembly and adjustment.

19. Electric bridges - repair.

20. Horizontal and vertical optimeters - disassembly, repair, assembly and adjustment of quill turbines with the manufacture of caps, springs and tables.

21. Axles with tubes - final processing with fine-tuning.

22. Periscopes - repair and adjustment.

23. Optical and radiation pyrometers - overhaul.

24. Devices of the electromagnetic system - repair with disassembly of the kinematic mechanism and the movable system.

25. Electronic regulating devices - repair.

26. Polarized relay - revision, repair and adjustment.

27. Systems of mobile devices - balancing.

28. Voltage stabilizers - revision and repair.

29. Assembly tables - current repair.

30. Ultrasonic electromagnetic thickness gauges - medium repair.

31. Electric drives of all types - installation and adjustment.

§ 95. Mechanic for instrumentation and automation of the 5th category

Job Description. Repair, adjustment, testing, adjustment, installation, adjustment and delivery of complex heat-measuring, optical-mechanical, electrodynamic, counting, automatic and other devices with an automatic control unit with a summing mechanism and remote transmission of readings. Identification and elimination of defects in the operation of instruments, manufacture of laboratory instruments. Drawing scales, grids and drawing up complex sketches. Conversion of electrical appliances to other measurement limits. Adjustment and verification of qualifications of all types of thermal and electrical instrumentation, automatic regulators and automatic power supplies.

Must know: design features of repaired complex and precise instruments and methods of their adjustment and alignment; arrangement of precise measuring instruments; causes of defects in the operation of devices and automatic machines, measures to prevent and eliminate them; kinematic diagram of self-recording devices of all types; rules for the repair, verification and adjustment of complex instruments and automata and rules for the selection of basic surfaces that guarantee the required accuracy.

Work examples

1. Automatic power supply, pressure and temperature - repair, check and adjustment.

4. Film projection equipment - disassembly, repair, assembly, adjustment.

5. Carriage scales, automobile scales with rocker dial and pointing instruments - installation, adjustment, check of racks, platform brackets.

6. Goniometers - repair, check, adjustment.

7. Optical glass parts - fine-tuning.

8. Interferometers - repair, check, adjustment.

9. Cinema and cameras - setting the angle of the mirror, correcting the diaphragm block, the barrier.

10. Depth exemplary pressure gauges and potentiometers - repair with scale recalibration.

11. Self-recording and contact pressure gauges - repair.

12. Measuring machines for measuring lengths - repair, check, adjustment.

13. Processing machines of domestic production - assembling units.

14. Universal microscopes - repair, check, adjustment.

15. Instrumental microscopes - repair of the stroke head of the microscope; repair, assembly and checking of the table for accuracy.

16. Electric and electronic bridges - repair.

17. Precision levels - repair, check, adjustment.

18. Axes of arrows of devices - sharpening and polishing.

19. Automatic gas analysis devices, radioactive ultrasonic and radioactive pneumatic regulators, capacitive signaling devices, system blocks, etc. - repair, assembly and adjustment.

20. Oxygen and pyrometric devices - repair, check, adjustment.

21. Complex optical-mechanical devices of various systems and designs - repair, adjustment and testing.

22. Pointer measuring instruments - overhaul with replacement of main parts and assemblies - rewinding of frames, replacement of torque springs with selection of their strength, recalibration of instruments to other measurement limits.

23. Precision instruments (optical pyrometers, analytical, microanalytical balances, etc.) - complete overhaul with a guarantee of service life.

24. Universal devices for checking worm cutters - checking, adjusting.

25. pH meters - repair with complete disassembly and assembly.

26. Flowmeters with a secondary control device - repair.

27. Telecells of the telemechanization system, linear nodes and radio control - repair, assembly, testing and adjustment.

28. One-second theodolites - repair, check, adjustment.

29. Squares and calibration plates, sine rulers - repair and finishing of surfaces.

30. Thermal shields - switching of complex electrical circuits.

31. Eccentrics - finishing the curved surface on the goniometer.

§ 96. Locksmith for instrumentation and automation of the 6th category

Job Description. Repair, adjustment, installation, testing, adjustment, adjustment and calibration of experimental, experimental and unique heat-measuring, automatic and electronic equipment of projection and optical systems, radioactive devices, radio station units, direction finders, radar installations. Identification and elimination of defects in the operation of equipment. Determination of the degree of wear of parts and assemblies. Adjustment and comprehensive testing after wiring diagrams for thermal control and automation of boilers, turbines and process equipment. Assembling circuits for testing thermal automation devices.

Must know: device, interaction of complex devices, the technological process of their assembly and methods of adjustment; electrical thermal diagrams of thermal automation devices; device and methods of alignment of complex control and adjustment devices; properties of optical glass, metals and auxiliary materials, conductors, semiconductors used in instrument making; basics of calculating gears of various gearing profiles and optical systems; fundamentals of physics, mechanics, telemechanics, heat engineering, electrical engineering, metrology, radio engineering and electronics in the amount of work performed.

Requires secondary vocational education.

2. Analyzers of automatic composition of liquids and gases (titrimeters, infrared absorption gas analyzers) - overhaul and adjustment.

3. Film projection devices - adjustment of the Maltese and clamshell systems.

4. Electronic equipment - adjustment.

5. Scales automatic portion - overhaul, installation, adjustment and verification.

6. Scales and weights exemplary - repair, adjustment, verification.

7. Exemplary wagon scales - repair, installation, adjustment and verification.

8. Optical-acoustic gas analyzers - overhaul, adjustment.

9. Rangefinders - repair and adjustment of the optical system.

10. Television meters - repair, check.

11. Cinema and cameras - adjusting shutters, repairing the slowdown mechanism, replacing the rangefinder prism, eliminating backlash in the range camera "Kyiv", "Start", "Change" and repairing the self-timer, eliminating mirror drop, correcting uneven film buckles, setting lenses to focus , cleaning the viewfinder, changing the mirror, adjusting the lens cocking spring.

12. Magnetic oxygen meters - installation and adjustment.

13. Contours of oscillatory telecells of telemechanization systems - repair, adjustment.

14. Comparators - repair, adjustment.

15. Reduction shops, Warren motors - repair and adjustment.

16. Resistance stores - repair.

17. Oscilloscopes - repair.

18. Optical pyrometers, radiation and potentiometers - repair and adjustment.

19. Checkweighing platforms - check.

20. Molds of complex configuration - manufacturing.

21. Salinity alarms - installation, repair, adjustment.

22. Automation schemes for blowing heating surfaces and continuous blowing boilers - repair and adjustment.

23. Wiring and switching diagrams - drawing up according to electrical circuit diagrams.

24. Resistance thermometers - winding the active part and welding the places of separation.

25. Control testers (devices) - repair.

26. Magnetic amplifiers - repair.

27. Selective devices - selection of places, marking and installation according to the concepts of thermal control and auto-regulation.

28. Electronic level gauges - repair and adjustment after installation.

§ 97. Locksmith for instrumentation and automation of the 7th category

Job Description. Repair, maintenance, inspection, testing, installation, adjustment and commissioning of electronic devices based on microprocessors, mini- and micro-computers and terminal devices of the teleprocessing system. Adjustment, adjustment and commissioning of complex systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work on the elements of these systems, programming controllers, micro- and mini-computers and other equipment and electronic computers, ensuring their output to set operating parameters. Diagnostics of equipment control systems using special test programs.

Must know: basic principles of building control systems based on microprocessor technology, functional and block diagrams of programmable controllers, micro- and mini-computers; design of microprocessor devices; fundamentals of programming and theory of automated electric drive; ways of introducing technological and test programs; a method for setting up systems in order to obtain the specified static and dynamic characteristics of devices and instruments of converter technology; the arrangement of the main instrumentation and diagnostic equipment, created on the basis of microprocessor technology; methods and organization of building "memory" in control systems.

Requires secondary vocational education.

Work examples

1. Microprocessor "Intelligent" differential pressure gauges, pressure and level sensors - checking, testing, reconfiguration using communicators.

2. Microprocessor-based gas analyzers, moisture, salinity, quality meters - checking, testing, entering programs, changing ranges, determining faults by tests.

§ 98. Locksmith for instrumentation and automation of the 8th category

Job Description. Comprehensive maintenance and adjustment, repair, inspection, testing, installation and commissioning of complex and unique systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work of these systems, programmable controllers, micro- and mini-computers and other equipment of electronic computing facilities, as well as peripheral equipment. Their diagnosis with the help of test programs and stands with the use of computer technology. Drawing up tests and corrections of technological programs and stands using computer technology.

Must know: ways to build control systems based on microprocessor technology; circuit diagrams of programmable controllers, micro- and mini-computers; ways to correct technological and test programs; organization of a complex of works on adjustment and troubleshooting of devices and systems of computer technology; device and diagnostics of unique measuring and control systems and complexes; theory of automatic control; the main "languages" of programming used in specific technological equipment.

Requires secondary vocational education.

Work examples

1. Microprocessor controllers, regulators - verification, programming, introduction of programs, selection of changes in the characteristics of regulation for each specific control node.

2. Microprocessor logic circuits - adjustment, verification, fault detection by tests.

3. Microprocessor devices with digital inputs and outputs - checking, programming.

4. Microprocessor-based intelligent sensors for pressure, temperature, level sensors - setting, programming, testing, testing using a communicator using the HART or SMART protocol.

5. Microprocessor controllers, vibrometers - adjustment, programming, repair, delivery for testing.

6. Microprocessor-based level gauges, recorders, paperless recorders (based on a micro-computer), microprocessor-based gas analyzers, pH meters, humidity and temperature meters - connection to a PC, configuration, programming, adjustment, testing, delivery for verification.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Mechanic for instrumentation and automation of the 2nd category" belongs to the category "Workers".

1.2. Qualification requirements - complete general secondary education and vocational training at work, without requirements for work experience.

1.3. Knows and applies:
- device, purpose and principle of operation of devices, mechanisms that are being repaired;
- diagrams of simple special control installations;
- basic properties of conductive and insulating materials and methods for measuring resistance in various links of the circuit;
- the purpose and rules for the use of the most common universal and special devices and the average complexity and accuracy of the control and measuring tool;
- basic information about tolerances and fits, qualifications (accuracy classes) and roughness parameters (machining cleanliness classes);
- varieties and types of anti-corrosion oils;
- the name and marking of the materials that it processes;
- the basics of electrical engineering in the scope of work that performs.

1.4. A locksmith for instrumentation and automation of the 2nd category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).

1.5. The locksmith for instrumentation and automation of the 2nd category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. A locksmith for instrumentation and automation of the 2nd category directs the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The locksmith for instrumentation and automation of the 2nd category during the absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Repairs, regulates, tests and delivers simple magnetoelectric, electromagnetic, optical-mechanical and thermal imaging devices and mechanisms.

2.2. Performs metalwork processing of parts according to 12 - 14 grades (5 - 7 classes of accuracy.

2.3. Determines the causes and eliminates malfunctions of simple devices.

2.4. Mounts simple wiring diagrams.

2.5. Winds springs from wire in a cold state, performs protective lubrication of parts.

2.6. Repairs devices of medium complexity under the guidance of a highly qualified locksmith.

2.7. Knows, understands and applies the current regulatory documents relating to its activities.

2.8. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The Mechanic for Instrumentation and Automation of the 2nd category has the right to take actions to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. A locksmith for instrumentation and automation of the 2nd category has the right to receive all social guarantees provided for by law.

3.3. A locksmith for instrumentation and automation of the 2nd category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. A locksmith for instrumentation and automation of the 2nd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. A locksmith for instrumentation and automation of the 2nd category has the right to get acquainted with draft documents relating to his activities.

3.6. A locksmith for instrumentation and automation of the 2nd category has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. A locksmith for instrumentation and automation of the 2nd category has the right to improve his professional qualifications.

3.8. The locksmith for instrumentation and automation of the 2nd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. A locksmith for instrumentation and automation of the 2nd category has the right to familiarize himself with documents defining the rights and obligations of his position, criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. The locksmith for instrumentation and automation of the 2nd category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. A locksmith for instrumentation and automation of the 2nd category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. A locksmith for instrumentation and automation of the 2nd category is responsible for disclosing information about an organization (enterprise / institution) that is a trade secret.

4.4. The locksmith for instrumentation and automation of the 2nd category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. A locksmith for instrumentation and automation of the 2nd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. A locksmith for instrumentation and automation of the 2nd category is responsible for causing material damage to an organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The locksmith for instrumentation and automation of the 2nd category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Ammeters, voltmeters, ammeters, galvanometers - medium repair and adjustment.

5.2. Carriage scales - processing of irresponsible details.

5.3. Scales commodity mobile and stationary (mortise) - replacement and repair of a flooring of platforms and giretrimach_v.

5.4. Weights trade and conditional - repair and delivery under branding.

5.5. Details are simple in devices - metalwork with threading in through holes.

5.6. Frameworks for transformers - production.

5.7. Cinema - and cameras - replacement of glasses, locks, caps, repair of frame counters.

5.8. Gear wheels with a futor - picking.

5.9. Magnetic contactors and starters - medium repair.

5.10. Technical pressure gauges - compilation.

5.11. Millivoltmeters - medium repair, verification and delivery after testing.

5.12. The basis of the relay is drawing up according to a template.

5.13. Transducers p "ezoacoustic, electromagnetic sensors - medium repair.

5.14. Devices - setting to mechanical zero.

5.15. Sights, binoculars, spotting scopes - repairs and adjustments.

5.16. Copper conductors for resistances - blanks.

5.17. Regulators, distributors and large relays - repairs.

5.18. Contact thermocouples - drafting and regulation.

5.19. Copper and platinum resistance thermometers - compilation and calibration.

5.20. Clamps of complex configuration - manufacturing.

5.21. Gears, bushings, adjusting rings and other details of pins on rollers, drilling and reaming holes for pins.

§ 92. Locksmith for instrumentation and automation 2nd category

Job Description

• Repair, adjustment, testing and commissioning of simple, magnetoelectric, electromagnetic, optical-mechanical and heat measuring instruments and mechanisms.
• Locksmith processing of parts for 12-14 qualifications.
• Determining the causes and troubleshooting of simple devices.
• Installation of simple wiring diagrams.
• Winding springs from wire in a cold state, protective lubrication of parts.
• Repair of devices of medium complexity under the guidance of a more highly qualified locksmith.

Must know:

• device, purpose and principle of operation of repaired devices, mechanisms;
• schemes of simple special adjusting installations;
• basic properties of conductive and insulating materials and methods for measuring resistance in various links of the circuit;
• purpose and rules for the use of the most common universal and special devices and instrumentation;
• system of admissions and landings;
• grades and types of anti-corrosion oils and lubricants;
• name and marking of processed materials;
• fundamentals of electrical engineering in the scope of the work performed.

Work examples

• 1. Ammeters, voltmeters, pressure gauges. galvanometers - medium repair and adjustment.
• 2. Carriage scales - processing of various parts.
• 3. Commercial scales, mobile and stationary (mortise) - replacement and repair of platform flooring and weight holders.
• 4. Weights trade and conditional - repair and delivery under branding.
• 5. Details simple to devices - metalwork with threading in through holes.
• Frameworks for transformers - production.
• 7. Gear wheels with a futor - picking.
• 8. Cinema and cameras - change of eyepieces, locks, caps, repair of frame counters.
• 9. Magnetic contactors and starters - medium repair.
• 10. Technical pressure gauges - assembly.
• 11. Millivoltmeters - medium repair, verification and delivery after testing.
• 12. Relay base - template assembly.
• 13. Instruments - setting to mechanical zero.
• 14. Trailers, binoculars, spotting scopes - repair and adjustment.
• 15. Piezoacoustic transducers, electromagnetic sensors - medium repair.
• 16. Copper conductors for resistances - billet.
• 17. Regulators, distributors and large relays - repair.
• 18. Copper and platinum resistance thermometers - assembly and calibration.
• 19. Contact thermocouples - assembly and adjustment.
• 20. Clamps of complex configuration - manufacturing.
• 21. Gears, bushings, mounting rings and other parts - pinning on rollers, drilling and reaming holes for pins.

§ 93. Locksmith for instrumentation and automation 3rd category

Job Description

• Repair, assembly, verification, adjustment, testing, adjustment, installation and commissioning of heat-measuring, electromagnetic, electrodynamic, counting, optical-mechanical, pyrometric, automatic, self-recording and other devices of medium complexity with the removal of circuits.
• Locksmith processing of parts according to 11-12 qualifications with fitting and fine-tuning of parts.
• Drawing up and installation of schemes of connections of average complexity.
• Instrument coloring.
• Soldering with various solders (copper, silver, etc.).
• Heat treatment of parts with their subsequent fine-tuning.
• Determination of metal hardness with calibrated files.
• Repair, adjustment and adjustment of particularly complex instruments and apparatus under the guidance of a more highly qualified locksmith.

Must know:

• device, purpose and principle of operation of repaired and adjusted instruments and devices;
• state standards for testing and commissioning of individual instruments, mechanisms and devices;
• basic properties of metals, alloys and other materials used in repairs;
• electrical properties of conductive and insulating materials, methods of heat treatment of parts with subsequent finishing;
• influence of temperatures on measurement accuracy;
• symbols of shut-off, control safety valves in thermal schemes;
• rules for installing narrowing devices;
• types of laying impulse pipelines;
• installation of leveling and separation vessels;
• system of admissions and landings;
• quality and roughness parameters.

Work examples

• 1. Ammeters, voltmeters, galvanometers, millivoltmeters, pressure gauges, electric meters, gearboxes - overhaul and adjustment.
• 2. Adding machines and typewriters of all systems - current and medium repairs.
• 3. Aneroid barometers - repair and adjustment.
• 4. Technical scales - repair.
• 5. Commercial and automobile scales with a yoke indicating device - current and medium repairs, checking hardened steel parts of the scales, bending, grinding prisms, pillows and earrings.
• 6. Working weights - check on control scales.
• 7. Hydraulic sensors - pressure testing, repair.
• 8. Piezoacoustic sensors - overhaul, adjustment.
• 9. Details simple to devices - threading in blind holes.
• 10. Cinema and cameras - complete disassembly of shutters, repair of self-timers, setting lenses to focus, correcting apertures, adjusting pick-up coils.
• 11. Rings, ball holders - manufacturing.
• 12. Sorting magnets - production with installation on the machine.
• 13. Tubular pressure gauges - repair.
• 14. Micrometers with a division value of 0.01 mm - disassembly, fine-tuning of the microscrew, heel planes, nuts, as well as assembly and verification by plane-parallel end measures and interference glasses.
• 15. Potentiometers - disassembly, cleaning, assembly of the kinematic circuit.
• 16. Devices for electrical, electromagnetic and electrodynamic systems - overhaul.
• 17. Prisms - fine-tuning after hardening of simple guides.
• 18. Flow meters, time relays, mechanical float mechanisms - repair and adjustment.
• 19. Stereo distance meters, commander's pipes - repair and adjustment.
• 20. Tachometers - repair.
• 21. Thermocouples - installation.
• 22. Traction and pressure gauges - repair.
• 23. Electric chains - continuity.

§ 94. Locksmith for instrumentation and automation 4th category

Job Description

• Repair, adjustment, testing, adjustment, installation and commissioning of complex electromagnetic, electrodynamic, heat-measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with fitting and fine-tuning of parts and assemblies.
• Adjustment and adjustment of the device of relay protection, electroautomatics, telemechanics.
• Determination of defects of repaired devices and elimination of them.
• Locksmith processing of parts according to 7-10 qualifications and assembly of gear and worm gears.
• Drawing up and installation of complex schemes of connections.
• Calculation of the absolute and relative error in the verification and testing of devices.
• Drawing up defective statements and filling out passports and certificates for devices and machines.

Must know:

• device, principle of operation and methods of adjustment of repaired and adjusted complex devices, mechanisms, devices;
• purpose and methods of adjustment of control and measuring and control and adjustment instruments;
• methods of adjustment and calibration of instruments and apparatus and rules for taking characteristics during their testing;
• rules for calculating resistances;
• schemes of complex connections;
• rules for calculating absolute and relative errors when checking and testing devices;
• designations of thermal and electrical circuits and drawings;
• system of admissions and landings;
• quality and roughness parameters;
• fundamentals of mechanics and electronics in the scope of the work performed.

Work examples

• 1. Autoregulators - checking and adjustment on existing equipment.
• 2. Film projection equipment - replacement of individual components and parts.
• 3. Adding machines and typewriters of all systems - overhaul and restoration.
• 4. Accurate analytical scales - repair, adjustment.
• 5. Scales bunker elevator - current, average and capital repairs, adjustment and check.
• 6. Commercial and automobile scales with rocker indicating devices - overhaul.
• 7. Scales for commodity and automobile scales with a dial pointing device - overhaul, medium and current repairs.
• 8. Scales mortise commodity mobile and stationary - current, average and capital repairs, installation, adjustment, check.
• 9. Viewfinders - repair, adjustment.
• 10. Water meters of all systems and all diameters in wells - installation with switching to other diameters, medium repairs.
• 11. Rectifiers - revision and repair.
• 12. Self-recording galvanometers and logometers - disassembly and repair.
• 13. Cinema and photographic equipment - repair of synchronizers; diaphragms of deceleration mechanisms, rangefinder adjustment.
• 14. Gear wheels - finishing the keyway with a nozzle on the axle.
• 15. Magnetic contactors, marine starters - medium repair.
• 16. Clock mechanisms of all kinds of instruments (pressure gauges, traction gauges, etc.) - overhaul with the manufacture of parts and adjustment.
• 17. Microscopes - repair with fine-tuning of parts and alignment.
• 18. Pressure gauges and indicators - disassembly, repair, assembly and adjustment.
• 19. Electric bridges - repair.
• 20. Horizontal and vertical optimeters - disassembly, repair, assembly and adjustment of quill turbines with the manufacture of caps, springs and tables.
• 21. Axles with tubes - final processing with fine-tuning.
• 22. Periscopes - repair and adjustment.
• 23. Optical and radiation pyrometers - overhaul.
• 24. Devices of the electromagnetic system - repair with disassembly of the kinematic mechanism and the movable system.
• 25. Electronic regulating devices - repair.
• 26. Polarized relay - revision, repair and adjustment.
• 27. Systems of mobile devices - balancing.
• 28. Voltage stabilizers - revision and repair.
• 29. Assembly tables - current repair.
• 30. Ultrasonic electromagnetic thickness gauges - medium repair.
• 31. Electric drives of all types - installation and adjustment.

§ 95. Locksmith for instrumentation and automation 5th category

Job Description

• Repair, adjustment, testing, adjustment, installation, adjustment and delivery of complex heat-measuring, optical-mechanical, electrodynamic, counting, automatic and other devices with an automatic control unit with a summing mechanism and remote transmission of readings.
• Identification and elimination of defects in the operation of instruments, manufacture of laboratory instruments.
• Drawing scales, grids and drawing up complex sketches.
• Conversion of electrical appliances to other measurement limits.
• Adjustment and verification of qualifications of all types of thermal and electrical instrumentation, automatic regulators and automatic power supplies.

Must know:

• design features of repaired complex and precise instruments and methods of their adjustment and alignment;
• arrangement of precise measuring instruments;
• causes of defects in the operation of devices and automatic machines, measures to prevent and eliminate them;
• kinematic diagram of self-recording devices of all types;
• rules for the repair, verification and adjustment of complex instruments and automata and rules for the selection of basic surfaces that guarantee the required accuracy.

Work examples

• 1. Automatic power supply, pressure and temperature - repair, check and adjustment.
• 2. Autoregulators and devices - installation, adjustment, inspection to determine defects at the installation site and before repair.
• 3. Autoregulators and other equipment with electronic and semiconductor circuits - repair and reconstruction.
• 4. Film projection equipment - disassembly, repair, assembly, adjustment.
• 5. Carriage scales, automobile scales with rocker dial and pointing instruments - installation, adjustment, check of racks, platform brackets.
• 6. Goniometers - repair, check, adjustment.
• 7. Optical glass parts - fine-tuning.
• 8. Interferometers - repair, check, adjustment.
• 9. Cinema and cameras - setting the angle of the mirror, correcting the diaphragm block, the barrier.
• 10. Depth exemplary pressure gauges and potentiometers - repair with scale recalibration.
• 11. Self-recording and contact pressure gauges - repair.
• 12. Measuring machines for measuring lengths - repair, check, adjustment.
• 13. Processing machines of domestic production - assembling units.
• 14. Universal microscopes - repair, check, adjustment.
• 15. Instrumental microscopes - repair of the stroke head of the microscope; repair, assembly and checking of the table for accuracy.
• 16. Electric and electronic bridges - repair.
• 17. Precision levels - repair, check, adjustment.
• 18. Axes of arrows of devices - sharpening and polishing.
• 19. Automatic gas analysis devices, radioactive ultrasonic and radioactive pneumatic regulators, capacitive signaling devices, system blocks, etc. - repair, assembly and adjustment.
• 20. Oxygen and pyrometric devices - repair, check, adjustment.
• 21. Complex optical-mechanical devices of various systems and designs - repair, adjustment and testing.
• 22. Pointer measuring instruments - overhaul with replacement of main parts and assemblies - rewinding of frames, replacement of torque springs with selection of their strength, recalibration of instruments to other measurement limits.
• 23. Precision instruments (optical pyrometers, analytical, microanalytical balances, etc.) - complete overhaul with a guarantee of service life.
• 24. Universal devices for checking worm cutters - checking, adjusting.
• 25. pH meters - repair with complete disassembly and assembly.
• 26. Flowmeters with a secondary control device - repair.
• 27. Telecells of the telemechanization system, linear nodes and radio control - repair, assembly, testing and adjustment.
• 28. One-second theodolites - repair, check, adjustment.
• 29. Squares and calibration plates, sine rulers - repair and finishing of surfaces.
• 30. Thermal shields - switching of complex electrical circuits.
• 31. Eccentrics - finishing the curved surface on the goniometer.

§ 96. Locksmith for instrumentation and automation 6th category

Job Description

• Repair, adjustment, installation, testing, adjustment, adjustment and calibration of experimental, experimental and unique heat-measuring, automatic and electronic equipment of projection and optical systems, radioactive devices, radio station units, direction finders, radar installations.
• Identification and elimination of defects in the operation of equipment.
• Determination of the degree of wear of parts and assemblies.
• Adjustment and comprehensive testing after wiring diagrams for thermal control and automation of boilers, turbines and process equipment.
• Assembling circuits for testing thermal automation devices.

Must know:

• device, interaction of complex devices, the technological process of their assembly and methods of adjustment;
• electrical thermal diagrams of thermal automation devices;
• device and methods of alignment of complex control and adjustment devices;
• properties of optical glass, metals and auxiliary materials, conductors, semiconductors used in instrument making;
• basics of calculating gears of various gearing profiles and optical systems;
• fundamentals of physics, mechanics, telemechanics, heat engineering, electrical engineering, metrology, radio engineering and electronics in the amount of work performed.

Requires secondary vocational education.

Work examples

• 1. Autoregulators and heat measuring devices - adjustment on existing equipment.
• 2. Analyzers of automatic composition of liquids and gases (titrimeters, infrared absorption gas analyzers) - overhaul and adjustment.
• 3. Film projection devices - adjustment of the Maltese and clamshell systems.
• 4. Electronic equipment - adjustment.
• 5. Scales automatic portion - overhaul, installation, adjustment and verification.
• 6. Scales and weights exemplary - repair, adjustment, verification.
• 7. Exemplary wagon scales - repair, installation, adjustment and verification.
• 8. Optical-acoustic gas analyzers - overhaul, adjustment.
• 9. Rangefinders - repair and adjustment of the optical system.
• 10. Television meters - repair, check.
• 11. Cinema and cameras - adjusting shutters, repairing the slowdown mechanism, replacing the rangefinder prism, eliminating backlash in the range camera "Kyiv", "Start", "Change" and repairing the self-timer, eliminating mirror drop, correcting uneven film buckles, setting lenses to focus , cleaning the viewfinder, changing the mirror, adjusting the lens cocking spring.
• 12. Magnetic oxygen meters - installation and adjustment.
• 13. Contours of oscillatory telecells of telemechanization systems - repair, adjustment.
• 14. Comparators - repair, adjustment.
• 15. Reduction shops, Warren motors - repair and adjustment.
• 16. Resistance stores - repair.
• 17. Oscilloscopes - repair.
• 18. Optical pyrometers, radiation and potentiometers - repair and adjustment.
• 19. Checkweighing platforms - check.
• 20. Molds of complex configuration - manufacturing.
• 21. Salinity alarms - installation, repair, adjustment.
• 22. Automation schemes for blowing heating surfaces and continuous blowing boilers - repair and adjustment.
• 23. Wiring and switching diagrams - drawing up according to electrical circuit diagrams.
• 24. Resistance thermometers - winding the active part and welding the places of separation.
• 25. Control testers (devices) - repair.
• 26. Magnetic amplifiers - repair.
• 27. Selective devices - selection of places, marking and installation according to the concepts of thermal control and auto-regulation.
• 28. Electronic level gauges - repair and adjustment after installation.

§ 97. Mechanic for instrumentation and automation 7th category

Job Description

• Repair, maintenance, inspection, testing, installation, adjustment and commissioning of electronic devices based on microprocessors, mini- and micro-computers and terminal devices of the teleprocessing system.
• Adjustment, adjustment and commissioning of complex systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work on the elements of these systems, programming controllers, micro- and mini-computers and other equipment and electronic computers, ensuring their output to set operating parameters.
• Diagnostics of equipment control systems using special test programs.

Must know:

• basic principles of building control systems based on microprocessor technology, functional and block diagrams of programmable controllers, micro- and mini-computers;
• designs of microprocessor devices;
• fundamentals of programming and theory of automated electric drive;
• ways to introduce technological test programs;
• a method for setting up systems in order to obtain the specified static and dynamic characteristics of devices and instruments of converter technology;
• the arrangement of the main instrumentation and diagnostic equipment, created on the basis of microprocessor technology;
• methods and organization of building "memory" in control systems.

Requires secondary vocational education.

Work examples

• 1. Microprocessor "Intelligent" differential pressure gauges, pressure and level sensors - checking, testing, reconfiguration using communicators.
• 2. Microprocessor-based gas analyzers, moisture, salinity, quality meters - checking, testing, entering programs, changing ranges, determining faults by tests.

§ 98. Locksmith for instrumentation and automation 8th category

Job Description

• Comprehensive maintenance and adjustment, repair, inspection, testing, installation and commissioning of complex and unique systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work of these systems, programmable controllers, micro- and mini-computers and other equipment of electronic computing facilities, as well as peripheral equipment.
• Their diagnosis with the help of test programs and stands with the use of computer technology.
• Drawing up tests and corrections of technological programs and stands using computer technology.

Must know:

• ways to build control systems based on microprocessor technology;
• circuit diagrams of programmable controllers, micro- and mini-computers;
• ways to correct technological and test programs;
• organization of a complex of works on adjustment and troubleshooting of devices and systems of computer technology;
• device and diagnostics of unique measuring and control systems and complexes;
• theory of automatic control;
• the main "languages" of programming used in specific technological equipment.

Requires secondary vocational education.

Work examples

• 1. Microprocessor controllers, regulators - verification, programming, introduction of programs, selection of changes in the characteristics of regulation for each specific control node.
• 2. Microprocessor logic circuits - adjustment, verification, fault detection by tests.
• 3. Microprocessor devices with digital inputs and outputs - checking, programming.
• 4. Microprocessor-based intelligent sensors for pressure, temperature, level sensors - setting, programming, testing, testing using a communicator using the HART or SMART protocol.
• 5. Microprocessor controllers, vibrometers - adjustment, programming, repair, delivery for testing.
• 6. Microprocessor-based level gauges, recorders, paperless recorders (based on a micro-computer), microprocessor-based gas analyzers, pH meters, humidity and temperature meters - connection to a PC, configuration, programming, adjustment, testing, delivery for verification.

The profession of a mechanic dealing with instrumentation is becoming more and more relevant every day. What is the reason? This will be discussed further.

Who is an I&C engineer?

Almost any enterprise has a variety of different instruments, sensors, meters and other technical devices. All such equipment must be supervised by someone. The instrumentation adjuster is the very specialist who is able to control the safe and efficient operation of all devices available in the production. So, a professional is obliged to conduct a periodic inspection of the equipment, its high-quality repair or replacement.

It should be noted right away that the profession in question is not so simple. After all, a competent specialist must have a fairly wide range of knowledge, skills and abilities. Without all this, it will not be possible to carry out their work functions qualitatively.

What should an I&C engineer know?

The profession has as many as seven categories, and therefore the knowledge of specialists with different qualifications can differ significantly. However, it is worth highlighting the most basic points that are enshrined in the special job description of the employee. Here is some of them:

• basics of technological methods of locksmith production;
• the device of the working tool and its purpose;
• techniques, methods and means of working with springs in a hot or cold state;
• methods of performing locksmith work;
• basics of electrical work;
• the basics of connecting wires;
• properties of materials for tinning;
• the basics of safety, methods and means of protection during work.

And much more. It is also worth giving the basic practical skills that an employee should have. Among them:

• performing locksmith processing;
• proper use of tools;
• high-quality soldering;
• elimination of defects, etc.

Thus, a mechanic and automation must have a fairly large stock of knowledge and skills. Moreover, this employee must constantly develop his knowledge and skills. After all, progress does not stand still, and working equipment is constantly being improved.

The rights of the instrumentation adjuster

The specialist in question, like any other officially working person, has a certain range of rights. What are these rights? How and when can they be implemented? The instrumentation adjuster, according to a special job description, has the right to:

• constantly improve their skills and professional skills;
• demand from management the necessary documents or tools for work;
• arrange all necessary benefits or social guarantees;
• receive full salary on time;
• offer superiors various ideas or plans to improve the organization.

Above, only the most basic rights that the specialist in question has were named.

Responsibility of the instrumentation adjuster

A mechanic for instrumentation and automation has not only rights, but also a certain share of responsibility for some of his actions. What does the special job description fix in this case? Here are key excerpts from that document:

• the employee bears disciplinary responsibility for staying at the workplace in a state of drug or alcohol intoxication;
• the employee is obliged to bear responsibility for the complete failure or improper performance of his main work functions and duties.

In addition, the employee is responsible for:

• for causing material damage to the organization;
• for committing offenses or crimes in the workplace;
• for conflicts or inciting discord in the work team.

Thus, an instrumentation and automation fitter, like any other employee, is obliged to bear disciplinary, administrative or criminal liability for a certain kind of act, depending on their severity and scale.

Required education for work

How and where is it necessary to study in order to get the profession of "instrumentation and automation adjuster"? Training for this profession is available almost everywhere, and it will be almost no difficulty to obtain the education necessary for the specialty. So, the specialty of the same name is present in almost any technical school or college, which can be entered on the basis of 9 classes of the school. The duration of training is about 3-4 years. However, it is worth noting that there are also special courses where you can get qualified much faster. There are, however, they are far from everywhere; but the number of disciplines and curricula does not differ much compared to.

Among the training cycles necessary for obtaining education are:

• educational practice;
• Physical Culture;
• professional certifications.

About the 2nd and 3rd category in the profession

The Unified Tariff and Qualification Guide characterizes the profession in question as a job with seven categories. Each skill level has its own range of responsibilities and functions. The 2nd and 3rd categories in the profession are, one might say, initial. As a rule, only college graduates who have completed their studies, workers with little experience, etc. are concentrated here. Here are examples of jobs typical for a specialist with a 2nd or 3rd category:

• work with large relays, distributors and regulators; their assembly and repair;
• assembly and calibration of copper or platinum resistance thermometers;
• assembly, repair and adjustment of compact thermocouples;
• production, repair and commissioning of various degrees of complexity of clamps;
• drilling, grinding, reaming, pinning and other work with gears, bushings, set rings, screws, etc.

About the 4th and 5th category in the profession

The Unified Tariff and Qualification Handbook contains indications of job descriptions for specialists of the 4th and 5th categories. It is in these documents that the main examples of the work of specialists are fixed. Here are the approximate types of work that a locksmith with the 4th category should carry out:

• capital or scale commodity or automobile scales with an index device, bunker or analytical scales;
• repair or restoration of adding machines;
• replacement of necessary parts in automatic regulators;
• inspection, repair or adjustment work.

The instrumentation adjuster, having the 5th category, is able to carry out work of approximately the following type:

• repair and adjustment of sights;
• replacement of gear axles;
• balancing of mobile devices;
• repair of assembly tables;
• revision of polarized relays, etc.

About the 6th and 7th category in the profession

The ranks of an instrumentation and automation adjuster indicate a lot: the level of education, work experience, professional skills, etc. The 6th and 7th qualification levels are considered quite important and prestigious.

What types of work are typical for specialists with the 6th category?

• Adjustment on the existing equipment of autoregulators and heat meters.
• Repair of electronic equipment.
• Work with automatic portion scales.
• Work with wagon exemplary scales.
• Repair of oscilloscopes.
• Works with
• Repair, adjustment and commissioning of various electronic selection devices.

What types of work are typical for a specialist with a 7th grade? Here are some examples:

• testing and verification of microprocessor devices (pressure sensors, differential pressure gauges, etc.);
• verification and testing work with gas analyzers, measuring instruments (moisture, salt, pressure, etc.).

About the 8th category in the profession

A specialist with the eighth grade is considered the most important and experienced specialist in production. Naturally, this kind of worker is endowed with particularly complex functions. What is the professional standard in this case?

The instrumentation fitter with the latest qualification level, in addition to managerial duties, must also:

• compile and maintain programs for microprocessor controllers, regulators and other devices;
• select the necessary characteristics that would meet the efficient, but at the same time economical and optimal operation of the equipment;
• check, test and commission level gauges, recorders, vibrometers, devices with intelligent pressure sensors, paperless recorders, computer-based devices, etc.

A specialist may have many other functions, but here everything will depend on the orders of the authorities and the place of work.